P0336 2000 Honda Civic Code - Crankshaft Position Sensor 'A' Circuit Range/Performance
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0336 2000 Honda Civic indicates Crankshaft Position Sensor 'A' Circuit Range/Performance.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0336 2000 Honda Civic Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0336 2000 Honda Civic?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0336 2000 Honda Civic?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0336 2000 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0336 2000 Honda Civic code?
Need more information on how to fix the P0336 2000 Honda Civic code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0336 2000 Honda Civic code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0336 2000 Honda Civic Code
1. What are common symptoms of OBDII code P0336 on a 2000 Honda Civic?
The common symptoms of code P0336 on a 2000 Honda Civic include engine stalling, rough idling, difficulty starting the engine, and a decrease in fuel efficiency.
2. What does the OBDII code P0336 on a 2000 Honda Civic indicate?
Code P0336 in a 2000 Honda Civic indicates a problem with the Crankshaft Position Sensor 'A' Circuit Range/Performance.
3. What are the possible causes of OBDII code P0336 on a 2000 Honda Civic?
Possible causes of code P0336 on a 2000 Honda Civic include a faulty crankshaft position sensor, damaged sensor wiring, poor electrical connection, or issues with the engine's timing.
4. How can I diagnose OBDII code P0336 on a 2000 Honda Civic?
To diagnose code P0336 on a 2000 Honda Civic, you can use an OBDII scanner to read the code, visually inspect the crankshaft position sensor and its wiring, and test the sensor's resistance and voltage.
5. How do I repair OBDII code P0336 on a 2000 Honda Civic?
To repair code P0336 on a 2000 Honda Civic, you may need to replace the faulty crankshaft position sensor, repair damaged wiring, ensure proper electrical connections, and reset the trouble code using an OBDII scanner.
6. Can driving with OBDII code P0336 on a 2000 Honda Civic cause further damage?
Continuing to drive with code P0336 on a 2000 Honda Civic can potentially cause damage to the engine, lead to more serious issues, and result in decreased performance and fuel efficiency.
7. How much does it cost to fix OBDII code P0336 on a 2000 Honda Civic?
The cost to fix code P0336 on a 2000 Honda Civic can vary depending on the exact cause of the issue, but it typically ranges from $100 to $300 for parts and labor.
8. Can I reset OBDII code P0336 on a 2000 Honda Civic without repairing the issue?
While you can reset the trouble code using an OBDII scanner, it is not recommended to do so without addressing the underlying problem, as the issue may persist and cause further complications.
9. Is it possible to prevent OBDII code P0336 on a 2000 Honda Civic?
To help prevent code P0336 on a 2000 Honda Civic, it is essential to regularly maintain the vehicle, inspect and replace the crankshaft position sensor as needed, and address any engine performance issues promptly.
10. How long does it take to repair OBDII code P0336 on a 2000 Honda Civic?
The repair time for code P0336 on a 2000 Honda Civic can vary depending on the exact cause of the issue and the expertise of the mechanic, but it typically takes around 1-3 hours to diagnose and fix the problem.
Discuss the causes and fixes for P0336 2000 Honda Civic OBDII Code
Code P0336 2000 Honda Civic comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
