P0336 1997 Honda Civic Code - Crankshaft Position Sensor 'A' Circuit Range/Performance
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0336 1997 Honda Civic indicates Crankshaft Position Sensor 'A' Circuit Range/Performance.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0336 1997 Honda Civic Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0336 1997 Honda Civic?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0336 1997 Honda Civic?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0336 1997 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0336 1997 Honda Civic code?
Need more information on how to fix the P0336 1997 Honda Civic code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0336 1997 Honda Civic code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0336 1997 Honda Civic Code
1. What are the common symptoms of OBDII code P0336 on a 1997 Honda Civic?
- Common symptoms include engine stalling or rough idling, poor acceleration, and difficulty starting the vehicle.
2. What does the OBDII code P0336 indicate on a 1997 Honda Civic?
- OBDII code P0336 indicates a potential issue with the Crankshaft Position Sensor 'A' Circuit Range/Performance.
3. What are the possible causes of OBDII code P0336 on a 1997 Honda Civic?
- Possible causes include a faulty crankshaft position sensor, wiring issues, sensor alignment problems, or a damaged sensor connector.
4. How can I diagnose the cause of OBDII code P0336 on my 1997 Honda Civic?
- Diagnosis involves checking the crankshaft position sensor for proper operation, inspecting the wiring for damage, and ensuring the sensor is correctly aligned.
5. Can a faulty crankshaft position sensor cause OBDII code P0336 on a 1997 Honda Civic?
- Yes, a faulty crankshaft position sensor is a common cause of OBDII code P0336 as it affects the sensor's ability to accurately detect the crankshaft position.
6. What are some repair tips for fixing OBDII code P0336 on a 1997 Honda Civic?
- Repair tips include replacing the faulty crankshaft position sensor, repairing any damaged wiring, and ensuring proper sensor alignment during installation.
7. Is it safe to continue driving with OBDII code P0336 on a 1997 Honda Civic?
- It is recommended to address the issue promptly to prevent potential engine performance issues or further damage to the vehicle.
8. Can resetting the OBDII code P0336 on a 1997 Honda Civic fix the problem temporarily?
- Resetting the code may temporarily clear the warning light, but it will not fix the underlying issue causing OBDII code P0336.
9. How much does it typically cost to repair OBDII code P0336 on a 1997 Honda Civic?
- The cost of repair can vary depending on the cause of the code, but it may range from $100 to $300 for parts and labor.
10. Is it possible to prevent OBDII code P0336 from appearing on a 1997 Honda Civic?
- Regular maintenance, such as checking and replacing sensors as needed, can help prevent OBDII code P0336 from appearing on your 1997 Honda Civic.
Discuss the causes and fixes for P0336 1997 Honda Civic OBDII Code
Code P0336 1997 Honda Civic comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
