P0335 Mitsubishi Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 Mitsubishi indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 Mitsubishi Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 Mitsubishi?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 Mitsubishi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 Mitsubishi code?
Need more information on how to fix the P0335 Mitsubishi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 Mitsubishi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 Mitsubishi Code
1. What are common symptoms of OBDII code P0335 in a Mitsubishi related to the crankshaft position sensor circuit?
Symptoms may include engine stalling, rough idling, difficulty starting the vehicle, and a decrease in fuel efficiency.
2. What are the common causes of OBDII code P0335 in a Mitsubishi related to the crankshaft position sensor circuit?
Common causes may include a faulty crankshaft position sensor, damaged wiring or connectors, issues with the sensor's alignment, or a malfunctioning ECM.
3. How can I diagnose the issue causing OBDII code P0335 in my Mitsubishi related to the crankshaft position sensor circuit?
Diagnosis typically involves using a scan tool to read the code, testing the crankshaft position sensor for proper voltage and signal, inspecting wiring and connectors for damage, and checking the sensor's alignment.
4. Can a faulty crankshaft position sensor be repaired, or does it need to be replaced?
In most cases, a faulty crankshaft position sensor will need to be replaced rather than repaired to ensure proper functioning of the sensor circuit.
5. Are there any repair tips for addressing OBDII code P0335 in a Mitsubishi related to the crankshaft position sensor circuit?
Ensure that the replacement sensor is compatible with your Mitsubishi's make and model, carefully follow the manufacturer's instructions for installation, and clear the trouble code after completing the repair.
6. How important is it to address OBDII code P0335 in a Mitsubishi related to the crankshaft position sensor circuit promptly?
It is important to address this code promptly as the crankshaft position sensor plays a crucial role in the engine's operation, and ignoring the issue can lead to further damage or engine performance issues.
7. Can driving with OBDII code P0335 in a Mitsubishi related to the crankshaft position sensor circuit cause any additional damage?
Continued driving with this code present can potentially lead to further issues such as engine misfires, increased fuel consumption, or even engine failure in extreme cases.
8. Will resetting the OBDII trouble code P0335 in a Mitsubishi related to the crankshaft position sensor circuit permanently fix the problem?
Simply resetting the code will not fix the underlying issue causing P0335. Proper diagnosis and repair of the crankshaft position sensor circuit are necessary to resolve the problem effectively.
9. How much does it typically cost to repair OBDII code P0335 in a Mitsubishi related to the crankshaft position sensor circuit?
The cost of repairing this issue can vary depending on the cause of the problem, the cost of parts, and labor charges. It is advisable to consult a professional mechanic for an accurate estimate.
10. Can a DIY enthusiast with basic automotive knowledge tackle the repair for OBDII code P0335 in a Mitsubishi related to the crankshaft position sensor circuit?
While some DIY enthusiasts may feel comfortable replacing a crankshaft position sensor, diagnosing and repairing the underlying cause of P0335 may require more advanced automotive knowledge. If unsure, it is best to consult a professional mechanic.
Discuss the causes and fixes for P0335 Mitsubishi OBDII Code
-
Dont know anything about codes. My 2005 Mitsubishi 380 went to the dealer today because of a engine warning light on the dash. $149.00 to read the problem on the computer.$868.00 to replace a Crankshaft position sensor.Does this sound correct or have I been taken for a ride. After reading some of the comments and causes that are being shared around I think I might have been.
-
Prices are high, but sometimes it depends where you live. You could ask them to explain the repair and show you where the sensor is and why it cost that much.
-
i recently had to rep;ace the crankshaft sensror on my 2001 galant. since then the car will crank but wont start. ive replaced the sensor with a new one, as well as replaced the cam shaft sensor,nthe fuel pump, timinhg belt, and have meticulously set the timing in hopes of solving my problem. nothing works! i have noticed though, that my anti-theft system does not seem to be operating. the little light that should come on my dash doesnt and the alarm system doesnt set. i know that this could be a reason for my car not STARTING BECAUSE IVE Had this problem with a car before. ive done everything and this seems like it may be the problem...help!
-
If your 2001 Galant cranks but won’t start after replacing the crankshaft sensor and other components, the anti-theft system could indeed be the issue. A malfunctioning immobilizer can prevent the car from starting. Check if the key fob and immobilizer system are functioning properly, as the absence of the anti-theft light suggests a potential issue. You may need to reset the anti-theft system or reprogram the key. If that doesn’t work, verify all sensor connections and ensure there’s spark and fuel delivery. Consulting a professional with the ability to scan the immobilizer system may help resolve the issue.
-
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
