P0335 2014 Chevrolet Silverado Code - Crankshaft Position Sensor Circuit
Quick Answer
The crankshaft position sensor is an internally magnetic biased digital output integrated circuit sensing device. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2014 Chevrolet Silverado indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2014 Chevrolet Silverado Description
The ECM also has a dedicated replicated crankshaft position sensor signal output circuit that may be used as an input signal to other modules for monitoring engine RPM.
The Diagnostic Trouble Code (DTC) will be set when no signal is sent from the Crankshaft Position Sensor to the ECM for greater than 1s.
What are the Possible Causes of the DTC P0335 2014 Chevrolet Silverado?
- Faulty Crankshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0335 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2014 Chevrolet Silverado code?
Need more information on how to fix the P0335 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2014 Chevrolet Silverado Code
What does the OBDII code P0335 mean on a 2014 Chevrolet Silverado?
P0335 indicates an issue with the crankshaft position sensor circuit, meaning the engine control module (ECM) is unable to detect or properly interpret the crankshaft position sensor signal.
What are the common symptoms of code P0335 in a 2014 Chevrolet Silverado?
Common symptoms include the engine failing to start, rough idling, stalling, reduced power, and the Check Engine Light illuminating.
What causes the P0335 code in a 2014 Chevrolet Silverado?
Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, a failed reluctor ring, or a malfunctioning ECM.
Can I drive my 2014 Chevrolet Silverado with a P0335 code?
Driving with a P0335 code is not recommended, as it can result in engine stalling, power loss, or difficulty restarting, which may pose safety risks.
How do I diagnose the P0335 code on a 2014 Chevrolet Silverado?
Start by inspecting the crankshaft position sensor and its wiring for damage or loose connections. Use a multimeter to test the sensor, and check the ECM for proper signal interpretation.
How much does it cost to fix the P0335 code on a 2014 Chevrolet Silverado?
Repair costs can range from $100 to $300 for sensor replacement, while more extensive repairs like fixing wiring or ECM issues may cost more.
Is replacing the crankshaft position sensor the only solution for a P0335 code?
No, the issue could also stem from damaged wiring, a defective ECM, or a worn-out reluctor ring, which may require different repairs.
Where is the crankshaft position sensor located on a 2014 Chevrolet Silverado?
The crankshaft position sensor is typically located near the bottom of the engine, close to the crankshaft pulley or flywheel housing.
How do I reset the Check Engine Light after fixing the P0335 code?
Use an OBDII scanner to clear the code after repairs. If the issue is resolved, the light should remain off. If it reappears, further diagnosis is needed.
What tools are needed to repair a P0335 code on a 2014 Chevrolet Silverado?
Common tools include an OBDII scanner, multimeter, basic hand tools (sockets, wrenches), and possibly a replacement crankshaft position sensor.
Discuss the causes and fixes for P0335 2014 Chevrolet Silverado OBDII Code
Code P0335 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
