P0335 2012 Nissan Xterra Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2012 Nissan Xterra indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2012 Nissan Xterra Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2012 Nissan Xterra?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2012 Nissan Xterra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
2005 Xterra Crankshaft Position Sensor Replacement
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2012 Nissan Xterra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2012 Nissan Xterra code?
Need more information on how to fix the P0335 2012 Nissan Xterra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2012 Nissan Xterra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2012 Nissan Xterra Code
1. What does OBDII code P0335 on a 2012 Nissan Xterra indicate?
The code P0335 in a 2012 Nissan Xterra signals a problem with the Crankshaft Position Sensor Circuit.
2. What are some common symptoms of a P0335 code in a 2012 Nissan Xterra?
Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and a decrease in fuel efficiency.
3. What are the potential causes of a P0335 code in a 2012 Nissan Xterra?
Potential causes include a faulty crankshaft position sensor, damaged sensor wiring, sensor connection issues, or a malfunction in the engine control module.
4. How can I diagnose the P0335 code in my 2012 Nissan Xterra?
Diagnosis typically involves using an OBDII scanner to read the code, inspecting the condition of the crankshaft position sensor and its wiring, and testing the sensor's output using a multimeter.
5. Can I continue driving my 2012 Nissan Xterra with a P0335 code?
It is not recommended to drive the vehicle with a P0335 code as it can lead to further engine damage and potential safety hazards.
6. How can I repair a P0335 code in my 2012 Nissan Xterra?
Repair options may include replacing the crankshaft position sensor, repairing or replacing damaged wiring, ensuring proper sensor connections, or reprogramming the engine control module.
7. Is it possible to reset the P0335 code in a 2012 Nissan Xterra without fixing the issue?
While you can clear the code using an OBDII scanner, the underlying problem causing the code will need to be addressed to prevent it from reoccurring.
8. Can a P0335 code in a 2012 Nissan Xterra be triggered by other issues?
Yes, other factors such as timing belt issues, engine misfires, or mechanical engine problems can potentially trigger a P0335 code.
9. How long does it typically take to repair a P0335 code in a 2012 Nissan Xterra?
The repair time can vary depending on the exact cause of the issue, but a straightforward sensor replacement may take around 1-2 hours.
10. Are there any preventive measures to avoid a P0335 code in a 2012 Nissan Xterra?
Regular maintenance, such as inspecting and replacing the crankshaft position sensor at recommended intervals, can help prevent the occurrence of a P0335 code.
Discuss the causes and fixes for P0335 2012 Nissan Xterra OBDII Code
Code P0335 2012 Nissan Xterra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
