P0335 2012 Nissan Rogue Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2012 Nissan Rogue indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2012 Nissan Rogue Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2012 Nissan Rogue?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2012 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2012 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2012 Nissan Rogue code?
Need more information on how to fix the P0335 2012 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2012 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0335 in a 2012 Nissan Rogue?
The common symptoms include engine stalling, difficulty starting the engine, poor acceleration, and rough idling.
2. What could cause the OBDII code P0335 in a 2012 Nissan Rogue?
The main cause of code P0335 is a faulty or failing crankshaft position sensor or issues with the sensor's circuit.
3. How can I diagnose the crankshaft position sensor circuit on a 2012 Nissan Rogue?
Diagnosing the circuit involves checking the sensor's wiring harness for damage, testing the sensor using a multimeter, and inspecting the sensor's connector for corrosion or loose connections.
4. What are some repair tips for fixing OBDII code P0335 on a 2012 Nissan Rogue?
Repair tips include replacing the faulty crankshaft position sensor, repairing damaged wiring, ensuring proper sensor alignment, and clearing the trouble codes with an OBDII scanner.
5. Can a dirty or malfunctioning crankshaft position sensor trigger code P0335 in a 2012 Nissan Rogue?
Yes, a dirty or malfunctioning crankshaft position sensor can disrupt the signal to the engine control module, triggering code P0335.
6. Are there any safety concerns associated with driving a 2012 Nissan Rogue with OBDII code P0335?
Driving with code P0335 may lead to unexpected stalling, loss of power, or potential engine damage, so it's advisable to address the issue promptly.
7. Is it possible to reset the OBDII code P0335 in a 2012 Nissan Rogue without fixing the underlying problem?
Resetting the code without fixing the issue will only temporarily turn off the check engine light, but the problem will persist and likely trigger the code again.
8. How crucial is the crankshaft position sensor in the overall performance of a 2012 Nissan Rogue?
The crankshaft position sensor plays a critical role in determining ignition timing and fuel injection, making it essential for the engine's proper functioning.
9. Can extreme weather conditions affect the crankshaft position sensor circuit in a 2012 Nissan Rogue?
Extreme temperatures or moisture can impact the sensor's performance, potentially leading to issues like code P0335 in a 2012 Nissan Rogue.
10. What is the typical cost to repair OBDII code P0335 by replacing the crankshaft position sensor in a 2012 Nissan Rogue?
The cost of replacing the crankshaft position sensor in a 2012 Nissan Rogue can range from $100 to $300, depending on the parts and labor charges.
Discuss the causes and fixes for P0335 2012 Nissan Rogue OBDII Code
Code P0335 2012 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
