P0335 2012 Nissan Altima Sedan Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2012 Nissan Altima Sedan indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2012 Nissan Altima Sedan Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2012 Nissan Altima Sedan?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2012 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2012 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2012 Nissan Altima Sedan code?
Need more information on how to fix the P0335 2012 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2012 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2012 Nissan Altima Sedan Code
1. What does the OBDII code P0335 on a 2012 Nissan Altima Sedan indicate?
- The code P0335 indicates a problem with the crankshaft position sensor circuit on the 2012 Nissan Altima Sedan.
2. What are common symptoms of a P0335 code on a 2012 Nissan Altima Sedan?
- Common symptoms include engine stalling, rough idling, difficulty starting the engine, and a decrease in fuel efficiency.
3. What are possible causes of a P0335 code on a 2012 Nissan Altima Sedan?
- Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, or issues with the sensor's alignment.
4. How can I diagnose the cause of a P0335 code on my 2012 Nissan Altima Sedan?
- Diagnose the issue by checking the sensor's wiring and connectors for damage, ensuring the sensor is properly aligned with the crankshaft, and testing the sensor's resistance.
5. Can a faulty crankshaft position sensor be repaired, or does it need to be replaced?
- In most cases, a faulty crankshaft position sensor cannot be repaired and must be replaced with a new sensor.
6. Are there any tips for replacing the crankshaft position sensor on a 2012 Nissan Altima Sedan?
- When replacing the sensor, ensure the engine is cool, disconnect the battery, locate the sensor near the engine's crankshaft, and follow the manufacturer's specific instructions.
7. Will driving with a P0335 code on a 2012 Nissan Altima Sedan cause further damage?
- Continuing to drive with a P0335 code can potentially lead to more severe engine issues and should be addressed promptly to prevent further damage.
8. How much does it typically cost to repair a P0335 code on a 2012 Nissan Altima Sedan?
- The cost of repairing a P0335 code can vary depending on the root cause, but it may range from $100 to $300 for parts and labor.
9. Can resetting the OBDII system clear a P0335 code on a 2012 Nissan Altima Sedan?
- Resetting the OBDII system may temporarily clear the code, but if the underlying issue with the crankshaft position sensor circuit is not addressed, the code is likely to reappear.
10. Is it safe to drive my 2012 Nissan Altima Sedan with a P0335 code if the engine seems to be running fine?
- While the car may seem to be running fine with a P0335 code, it is not advisable to drive it for an extended period as it can lead to unexpected engine problems and potential breakdowns.
Discuss the causes and fixes for P0335 2012 Nissan Altima Sedan OBDII Code
Code P0335 2012 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
