AutoCodes – Toyota – P0335 2011 Toyota Camry

P0335 2011 Toyota Camry Code - Crankshaft Position Sensor 'A' Circuit

Quick Answer

The Crankshaft Position (CKP) sensor system consists of a CKP sensor plate and a pickup coil. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0335 2011 Toyota Camry indicates Crankshaft Position Sensor 'A' Circuit .
Common causes: Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 15,869

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0335 2011 Toyota Camry Description

The Crankshaft Position (CKP) sensor system consists of a CKP sensor plate and a pickup coil. The sensor plate has teeth and is installed on the crankshaft. The pickup coil is made of wound copper wire, an iron core and magnet. The sensor plate rotates and, as each tooth passes through the pickup coil, a pulse signal is created. The pickup coil generates signals per engine revolution. Based on these signals, the ECM calculates the crankshaft position and engine RPM. Using these calculations, the fuel injection time and ignition timing are controlled.

OBDII Code P0335 2011 Toyota Camry - Crankshaft Position Sensor 'A' Circuit - AutoCodes.com — P0335 2011 Toyota Camry Code - Crankshaft Position Sensor 'A' Circuit

What does this mean?

What are the Possible Causes of the DTC P0335 2011 Toyota Camry?

Faulty crankshaft position sensor
Crankshaft position sensor harness is open or shorted
Crankshaft position sensor circuit poor electrical connection
Signal plate may be damage
Starter motor may be faulty
Starting system circuit
Dead or weak battery

How to Fix the DTC P0335 2011 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replaced battery.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0335 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0335 2011 Toyota Camry code?

Need more information on how to fix the P0335 2011 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2011 Toyota Camry Code

1. What is OBDII code P0335 in a 2011 Toyota Camry?

OBDII code P0335 indicates a malfunction in the Crankshaft Position Sensor 'A' Circuit, suggesting that the sensor or its circuit is not functioning properly.

2. What symptoms might I notice if my 2011 Toyota Camry has the P0335 code?

Common symptoms include difficulty starting the engine, rough engine operation, engine stalling, and a check engine light that is illuminated.

3. What can cause the P0335 code to appear in a 2011 Toyota Camry?

Potential causes include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module.

4. How can I diagnose the P0335 code in my 2011 Toyota Camry?

Diagnosis should start with a visual inspection of the crankshaft position sensor and its connections. Use an OBDII scanner to check for additional error codes and a multimeter to verify the sensor's output.

5. What is the repair process for fixing the P0335 code in a 2011 Toyota Camry?

Repair may involve replacing the crankshaft position sensor, repairing or replacing damaged wiring, or in some cases, updating or replacing the engine control module.

6. Is it safe to drive my 2011 Toyota Camry with the P0335 code?

Driving with the P0335 code can lead to engine performance issues and potential stalling, which could be unsafe. It is advisable to address the problem as soon as possible.

7. How urgent is it to fix the P0335 code on a 2011 Toyota Camry?

It is fairly urgent to address this issue to prevent possible engine damage or stalling that could put you in unsafe driving situations.

8. Can a faulty crankshaft position sensor affect fuel economy in a 2011 Toyota Camry?

Yes, a malfunctioning crankshaft position sensor can affect fuel economy by causing the engine to run inefficiently.

9. What tools are needed to replace the crankshaft position sensor in a 2011 Toyota Camry?

Typical tools required include a socket set, screwdrivers, and possibly pliers. A multimeter can help in verifying the functionality of the sensor before replacing it.

10. How much does it typically cost to resolve the P0335 code in a 2011 Toyota Camry?

The cost can vary widely depending on whether the issue is with the sensor itself, wiring, or the control module. Sensor replacement typically ranges from $150 to $400 including parts and labor.