AutoCodes – Nissan – P0335 2011 Nissan Sentra

P0335 2011 Nissan Sentra Code - Crankshaft Position Sensor Circuit

Quick Answer

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0335 2011 Nissan Sentra indicates Crankshaft Position Sensor Circuit.
Common causes: Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,508

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0335 2011 Nissan Sentra Description

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the Electronic Control Module(ECM) to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.

OBDII Code P0335 2011 Nissan Sentra - Crankshaft Position Sensor Circuit - AutoCodes.com — P0335 2011 Nissan Sentra Code - Crankshaft Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC P0335 2011 Nissan Sentra?

Faulty crankshaft position sensor
Crankshaft position sensor harness is open or shorted
Crankshaft position sensor circuit poor electrical connection
Signal plate may be damage
Starter motor may be faulty
Starting system circuit
Dead or weak battery

How to Fix the DTC P0335 2011 Nissan Sentra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0335 2011 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0335 2011 Nissan Sentra code?

Need more information on how to fix the P0335 2011 Nissan Sentra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2011 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2011 Nissan Sentra Code

What are the common symptoms of OBDII code P0335 on a 2011 Nissan Sentra?

Common symptoms include engine stalling, rough idle, difficulty starting the car, and a decrease in fuel efficiency.

What are the possible causes of OBDII code P0335 on a 2011 Nissan Sentra?

The code P0335 on a 2011 Nissan Sentra is typically triggered by a faulty crankshaft position sensor, damaged wiring or connectors related to the sensor, or a malfunctioning engine control module (ECM).

How can I diagnose the issue with OBDII code P0335 on my 2011 Nissan Sentra?

To diagnose the issue, you can use an OBDII scanner to read the code, visually inspect the crankshaft position sensor and its wiring for any visible damage, and perform a continuity test on the sensor and its circuit.

Can I drive my 2011 Nissan Sentra with OBDII code P0335?

It is not recommended to drive your 2011 Nissan Sentra with OBDII code P0335, as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.

How do I repair OBDII code P0335 on a 2011 Nissan Sentra?

To repair OBDII code P0335 on a 2011 Nissan Sentra, you will likely need to replace the faulty crankshaft position sensor, repair or replace any damaged wiring or connectors, and clear the error code using an OBDII scanner.

Can a DIYer fix OBDII code P0335 on a 2011 Nissan Sentra?

While some DIYers may be able to replace the crankshaft position sensor themselves, diagnosing and repairing electrical issues related to OBDII code P0335 may require advanced automotive knowledge and tools. It's recommended to seek professional help if needed.

Is it necessary to reset the ECM after fixing OBDII code P0335 on a 2011 Nissan Sentra?

Yes, it is essential to reset the ECM after fixing OBDII code P0335 on a 2011 Nissan Sentra to clear the error code and ensure proper functioning of the vehicle.

What are the potential risks of ignoring OBDII code P0335 on a 2011 Nissan Sentra?

Ignoring OBDII code P0335 can lead to continued engine issues, potential engine damage, decreased fuel efficiency, and even safety hazards due to unexpected stalling or rough idling. It's crucial to address the problem promptly.