P0335 2007 Toyota Camry Code - Crankshaft Position Sensor 'A' Circuit
Quick Answer
The Crankshaft Position (CKP) sensor system consists of a CKP sensor plate and a pickup coil. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2007 Toyota Camry indicates Crankshaft Position Sensor 'A' Circuit .
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2007 Toyota Camry Description
What are the Possible Causes of the DTC P0335 2007 Toyota Camry?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2007 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2007 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2007 Toyota Camry code?
Need more information on how to fix the P0335 2007 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2007 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2007 Toyota Camry Code
1. What does the OBDII code P0335 mean on a 2007 Toyota Camry?
The P0335 code indicates a malfunction in the Crankshaft Position Sensor 'A' circuit, which monitors the crankshaft's position to ensure proper engine timing.
2. What are the common symptoms of code P0335 in a 2007 Toyota Camry?
Symptoms may include engine stalling, difficulty starting, rough idling, poor acceleration, or the Check Engine Light coming on.
3. What causes the P0335 code in a 2007 Toyota Camry?
Common causes include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, a failed reluctor ring, or issues with the engine control module (ECM).
4. Can I drive my 2007 Toyota Camry with a P0335 code?
It’s not recommended to drive with this code, as it can lead to engine stalling or further damage due to improper timing.
5. How do I fix the P0335 code on a 2007 Toyota Camry?
Fixes may include replacing the crankshaft position sensor, repairing damaged wiring or connectors, or addressing issues with the reluctor ring or ECM.
6. How do I locate the crankshaft position sensor on a 2007 Toyota Camry?
The crankshaft position sensor is typically located near the bottom of the engine, close to the crankshaft pulley or flywheel.
7. How much does it cost to repair the P0335 code on a 2007 Toyota Camry?
Repair costs can vary but typically range from $150 to $300, depending on whether the sensor or wiring needs replacement.
8. Can a dead battery cause the P0335 code on a 2007 Toyota Camry?
While a dead battery is not a direct cause, low voltage or electrical issues can sometimes affect sensor performance and trigger this code.
9. Does the P0335 code always mean the crankshaft position sensor is faulty?
No, the issue could also be related to wiring, connectors, the reluctor ring, or the ECM, so proper diagnosis is essential.
10. How can I diagnose the P0335 code in a 2007 Toyota Camry?
You can use an OBDII scanner to confirm the code, then inspect the crankshaft position sensor, wiring, and connectors for damage, or consult a professional mechanic for further diagnosis.
Discuss the causes and fixes for P0335 2007 Toyota Camry OBDII Code
Code P0335 2007 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
