P0335 2007 Nissan Sentra Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2007 Nissan Sentra indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2007 Nissan Sentra Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2007 Nissan Sentra?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2007 Nissan Sentra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2007 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2007 Nissan Sentra code?
Need more information on how to fix the P0335 2007 Nissan Sentra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2007 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2007 Nissan Sentra Code
1. What does OBDII code P0335 mean for a 2007 Nissan Sentra?
The OBDII code P0335 on a 2007 Nissan Sentra indicates a problem with the crankshaft position sensor circuit.
2. What are the common symptoms of a P0335 code on a 2007 Nissan Sentra?
Common symptoms of a P0335 code on a 2007 Nissan Sentra include stalling, rough idling, difficulty starting the engine, and poor acceleration.
3. What are the possible causes of a P0335 code on a 2007 Nissan Sentra?
Possible causes of a P0335 code on a 2007 Nissan Sentra include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, or a problem with the sensor's reluctor ring.
4. How can I diagnose a P0335 code on my 2007 Nissan Sentra?
Diagnosing a P0335 code on a 2007 Nissan Sentra involves checking the crankshaft position sensor's wiring, connectors, and reluctor ring for any damage or loose connections. Using a multimeter to test the sensor's resistance can also help pinpoint the issue.
5. Can I drive my 2007 Nissan Sentra with a P0335 code?
It is not recommended to drive your 2007 Nissan Sentra with a P0335 code, as it can lead to engine performance issues and potential stalling, posing a safety risk.
6. How do I repair a P0335 code on a 2007 Nissan Sentra?
To repair a P0335 code on a 2007 Nissan Sentra, you may need to replace the crankshaft position sensor, repair any damaged wiring or connectors, or inspect and potentially replace the reluctor ring.
7. Are there any DIY tips for fixing a P0335 code on a 2007 Nissan Sentra?
DIY tips for fixing a P0335 code on a 2007 Nissan Sentra include ensuring proper tools and equipment, following a service manual for guidance, and testing components thoroughly before replacing them.
8. What should I do if the P0335 code persists after repair on my 2007 Nissan Sentra?
If the P0335 code persists after repair on your 2007 Nissan Sentra, recheck the crankshaft position sensor installation, wiring connections, and reluctor ring for any overlooked issues that may be causing the problem.
9. How much does it cost to fix a P0335 code on a 2007 Nissan Sentra at a mechanic?
The cost to fix a P0335 code on a 2007 Nissan Sentra at a mechanic can vary depending on the exact cause of the issue, but it typically ranges from $150 to $300 for parts and labor.
10. Can a P0335 code on a 2007 Nissan Sentra cause other problems if left unaddressed?
Yes, leaving a P0335 code on a 2007 Nissan Sentra unaddressed can lead to more severe engine issues, such as poor fuel economy, increased emissions, and potential engine damage over time.
Discuss the causes and fixes for P0335 2007 Nissan Sentra OBDII Code
Code P0335 2007 Nissan Sentra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
