P0335 2006 Toyota Prius Code - Crankshaft Position Sensor 'A' Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2006 Toyota Prius indicates Crankshaft Position Sensor 'A' Circuit .
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2006 Toyota Prius Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2006 Toyota Prius?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2006 Toyota Prius?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2006 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2006 Toyota Prius code?
Need more information on how to fix the P0335 2006 Toyota Prius code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2006 Toyota Prius code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2006 Toyota Prius Code
1. What are the common symptoms of OBDII code P0335 in a 2006 Toyota Prius?
- Common symptoms include engine misfires, rough idling, stalling, poor acceleration, and difficulty starting the vehicle.
2. What does the OBDII code P0335 in a 2006 Toyota Prius indicate?
- The code P0335 indicates a problem with the Crankshaft Position Sensor 'A' Circuit in the vehicle.
3. What are the possible causes of OBDII code P0335 in a 2006 Toyota Prius?
- Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors, sensor alignment issues, or a damaged reluctor ring.
4. How can I diagnose the OBDII code P0335 in my 2006 Toyota Prius?
- Diagnosis involves using a scan tool to read the code, testing the crankshaft position sensor with a multimeter, checking the sensor's wiring and connectors for damage, and inspecting the reluctor ring for any issues.
5. Can I continue driving my 2006 Toyota Prius with the OBDII code P0335?
- It is not recommended to continue driving the vehicle with this code as it can lead to further engine damage and potential safety hazards.
6. How can I repair the OBDII code P0335 in my 2006 Toyota Prius?
- Repair typically involves replacing the faulty crankshaft position sensor, repairing any damaged wiring or connectors, and ensuring proper alignment of the sensor.
7. Is it possible to reset the OBDII code P0335 in a 2006 Toyota Prius without fixing the underlying issue?
- While you can clear the code with a scan tool, it will likely reappear until the root cause of the problem is addressed.
8. How much does it cost to repair OBDII code P0335 in a 2006 Toyota Prius?
- The cost of repair can vary depending on the exact cause of the issue, but it typically ranges from $100 to $300 for parts and labor.
9. How long does it take to repair OBDII code P0335 in a 2006 Toyota Prius?
- The repair process can take anywhere from 1 to 3 hours, depending on the accessibility of the sensor and any additional wiring repairs needed.
10. Can a DIY enthusiast fix OBDII code P0335 in a 2006 Toyota Prius?
- While it is possible for a skilled DIY enthusiast to replace the crankshaft position sensor, it is recommended to have the necessary tools and knowledge to avoid causing further damage to the vehicle.
Discuss the causes and fixes for P0335 2006 Toyota Prius OBDII Code
Code P0335 2006 Toyota Prius comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
