P0335 2006 Nissan Pathfinder Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2006 Nissan Pathfinder indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2006 Nissan Pathfinder Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2006 Nissan Pathfinder?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2006 Nissan Pathfinder?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2006 Nissan Pathfinder code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2006 Nissan Pathfinder code?
Need more information on how to fix the P0335 2006 Nissan Pathfinder code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2006 Nissan Pathfinder code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2006 Nissan Pathfinder Code
1. What are the common symptoms of OBDII code P0335 in a 2006 Nissan Pathfinder?
- Common symptoms include stalling, rough idling, difficulty starting the engine, and potential loss of power while driving.
2. What does OBDII code P0335 indicate in a 2006 Nissan Pathfinder?
- OBDII code P0335 in a 2006 Nissan Pathfinder indicates a problem with the crankshaft position sensor circuit.
3. What are some possible causes of OBDII code P0335 in a 2006 Nissan Pathfinder?
- Possible causes include a faulty crankshaft position sensor, damaged sensor wiring, loose connections, or issues with the sensor's signal to the ECU.
4. How can I diagnose the cause of OBDII code P0335 in my 2006 Nissan Pathfinder?
- You can diagnose the issue by checking the sensor's wiring for damage, inspecting the connections for looseness, and testing the sensor's output signal using a multimeter.
5. Can I continue driving my 2006 Nissan Pathfinder with OBDII code P0335?
- It is not recommended to continue driving with OBDII code P0335 as it can lead to engine performance issues and potential further damage if left unresolved.
6. How can I repair OBDII code P0335 in a 2006 Nissan Pathfinder?
- To repair OBDII code P0335, you may need to replace the crankshaft position sensor, repair any damaged wiring, secure loose connections, and clear the error code from the ECU.
7. Will resetting the ECU clear OBDII code P0335 in my 2006 Nissan Pathfinder?
- Resetting the ECU may temporarily clear the error code, but if the underlying issue with the crankshaft position sensor circuit is not resolved, the code is likely to reappear.
8. How much does it typically cost to repair OBDII code P0335 in a 2006 Nissan Pathfinder?
- The cost of repairing OBDII code P0335 can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast repair OBDII code P0335 in a 2006 Nissan Pathfinder?
- Yes, a DIY enthusiast with the necessary tools and knowledge can attempt to repair OBDII code P0335 by following a detailed repair guide specific to the 2006 Nissan Pathfinder.
10. Is it common for the crankshaft position sensor to fail in a 2006 Nissan Pathfinder?
- While not extremely common, the crankshaft position sensor can fail in a 2006 Nissan Pathfinder due to normal wear and tear or electrical issues over time.
Discuss the causes and fixes for P0335 2006 Nissan Pathfinder OBDII Code
-
I did replaced the two CKP sensor but still have the problem it was running for about 45 ml and motor stop. What is next. I did replaced the starter motor two months ago.
-
There is only one (1) "Crankshaft Position Sensor" and two (2) "Camshaft Position Sensors".
The P0335 code is for the "Crankshaft Position Sensor", is it possible that you replaced the "Camshaft Position Sensors" instead of the "Crankshaft Position Sensor"?
-
Yesterday morning my 2006 Pathfinder (240,000 miles) took a few extra seconds to start up. That has never happened before.
As I started down the road, the CEL came on as well as the VDC and SKID lights, all at once. The CEL codes were P0335 (crankshaft POS sensor), P0011 (camshaft sensor 1), and P0021 (camshaft sensor 2). I think the 0011 and 0021 codes are a "false positive" from the 0335 fault.
Later that afternoon it took nearly 5 minutes for the engine to start. The battery obviously had plenty of cranking power, so I'm ruling that simple explanation out. Any other thoughts before I pull the sensor?
-
With a hard start and the P0335 code, you probably have a bad Crankshaft Position Sensor. Since you also have the P0011 and P0021 codes, there is a small chance that low or dirty engine oil could also be the cause of the problem. When was the last time you check or change the engine oil?
-
Changed oil and filter this past December. I do it every 6 months (~5000 miles).
-
How is the engine oil level?
I would start with an oil change, it's been almost 6 months, so you will need an oil change soon anyways. -
The Crankshaft Position Sensor (CPS) of my 2003 Nissan Pathfinder SE was extremely easy to change. I hope this solves the problem.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
