P0335 2004 Nissan Sentra Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2004 Nissan Sentra indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2004 Nissan Sentra Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2004 Nissan Sentra?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2004 Nissan Sentra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2004 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2004 Nissan Sentra code?
Need more information on how to fix the P0335 2004 Nissan Sentra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2004 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2004 Nissan Sentra Code
1. What are the common symptoms of OBDII code P0335 on a 2004 Nissan Sentra?
The common symptoms include engine stalling, difficulty starting the engine, rough idling, and a decrease in fuel efficiency.
2. What does OBDII code P0335 on a 2004 Nissan Sentra indicate?
Code P0335 indicates a problem with the crankshaft position sensor circuit.
3. What are the possible causes of OBDII code P0335 on a 2004 Nissan Sentra?
Possible causes include a faulty crankshaft position sensor, damaged sensor wiring, poor electrical connections, or a malfunctioning engine control module (ECM).
4. How can I diagnose the issue related to OBDII code P0335 on a 2004 Nissan Sentra?
Diagnosing the issue involves checking the crankshaft position sensor for any visible damage, testing the sensor's electrical connections, and using a multimeter to check for proper voltage and signals.
5. Can I still drive my 2004 Nissan Sentra with OBDII code P0335?
It is not recommended to drive your vehicle with code P0335, as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.
6. How can I repair OBDII code P0335 on my 2004 Nissan Sentra?
Repairing code P0335 typically involves replacing the faulty crankshaft position sensor, repairing damaged wiring, and ensuring all electrical connections are secure and functioning properly.
7. Are there any specific tips for replacing the crankshaft position sensor on a 2004 Nissan Sentra?
When replacing the sensor, make sure to disconnect the battery, locate the sensor's position near the engine's crankshaft, and follow the manufacturer's instructions for installation.
8. How much does it cost to fix OBDII code P0335 on a 2004 Nissan Sentra?
The cost of fixing code P0335 can vary depending on the root cause of the issue, but it typically ranges from $100 to $300 for parts and labor.
9. Will resetting the OBDII code P0335 on my 2004 Nissan Sentra make it go away permanently?
Resetting the code may temporarily clear the error, but if the underlying issue is not addressed, the code is likely to reappear. It is crucial to diagnose and fix the problem to prevent future occurrences.
10. Can a DIY enthusiast with basic automotive knowledge fix OBDII code P0335 on a 2004 Nissan Sentra?
Yes, a DIY enthusiast with basic automotive knowledge can potentially fix code P0335 by following repair guides, using the right tools, and being cautious when working on the vehicle's electrical components.
Discuss the causes and fixes for P0335 2004 Nissan Sentra OBDII Code
Code P0335 2004 Nissan Sentra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
