P0335 2003 Nissan Xterra Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2003 Nissan Xterra indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2003 Nissan Xterra Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2003 Nissan Xterra?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2003 Nissan Xterra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2003 Nissan Xterra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2003 Nissan Xterra code?
Need more information on how to fix the P0335 2003 Nissan Xterra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2003 Nissan Xterra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2003 Nissan Xterra Code
1. What does OBDII code P0335 on a 2003 Nissan Xterra mean?
The P0335 code indicates a problem with the crankshaft position sensor circuit in the vehicle.
2. What are the common symptoms of a P0335 code in a 2003 Nissan Xterra?
Common symptoms include engine stalling, difficulty starting the engine, poor acceleration, and rough idling.
3. What are the possible causes of a P0335 code in a 2003 Nissan Xterra?
Possible causes include a faulty crankshaft position sensor, damaged sensor wiring, loose connections, or a malfunctioning engine control module (ECM).
4. How can I diagnose a P0335 code in my 2003 Nissan Xterra?
Diagnosing a P0335 code typically involves checking the condition of the crankshaft position sensor, inspecting the sensor wiring for damage, and testing the sensor's signal with a multimeter.
5. Can I drive my 2003 Nissan Xterra with a P0335 code?
It is not recommended to drive your vehicle with a P0335 code as it can lead to further engine damage and potentially unsafe driving conditions.
6. How do I repair a P0335 code in my 2003 Nissan Xterra?
Repairing a P0335 code usually involves replacing the faulty crankshaft position sensor, repairing any damaged wiring, and clearing the code from the vehicle's ECM.
7. Are there any tips for preventing a P0335 code in my 2003 Nissan Xterra?
Regularly inspecting and maintaining the crankshaft position sensor and its wiring can help prevent the occurrence of a P0335 code in your vehicle.
8. How much does it cost to fix a P0335 code in a 2003 Nissan Xterra?
The cost of fixing a P0335 code can vary depending on the specific issue, but it typically ranges from $100 to $300 for parts and labor.
9. Can a P0335 code in a 2003 Nissan Xterra cause permanent engine damage?
Continued driving with a P0335 code can potentially cause damage to the engine, so it's important to address the issue promptly to prevent further problems.
10. Will resetting the OBDII code P0335 in my 2003 Nissan Xterra make it go away permanently?
Resetting the code may temporarily clear the warning light, but if the underlying issue causing the P0335 code is not fixed, the code is likely to reappear.
Discuss the causes and fixes for P0335 2003 Nissan Xterra OBDII Code
-
I have a 2003 nissan xterra and codes P0328 and P0335 came up when I first ran diagnostics. I checked the battery and it is good, replaced battery cables, changed the fuel filter, ran injector cleaner and three tanks of premium fuel. The final step that I thought would solve the problem is changing the crankshaft sensor with an aftermarket sensor purchased from amazon with good reviews. The same error codes are still coming up. Can anyone tell me what the next step is other than taking it to a mechanic to fix?
Thanks Friends!
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
