P0335 2002 Nissan Xterra Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2002 Nissan Xterra indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2002 Nissan Xterra Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2002 Nissan Xterra?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2002 Nissan Xterra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2002 Nissan Xterra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2002 Nissan Xterra code?
Need more information on how to fix the P0335 2002 Nissan Xterra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2002 Nissan Xterra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2002 Nissan Xterra Code
1. What are the common symptoms of OBDII code P0335 in a 2002 Nissan Xterra?
The common symptoms of code P0335 in a 2002 Nissan Xterra include engine stalling or no-start condition, rough idling, poor acceleration, and possibly misfires.
2. What does OBDII code P0335 indicate for a 2002 Nissan Xterra?
Code P0335 in a 2002 Nissan Xterra indicates a malfunction in the crankshaft position sensor circuit.
3. What are the possible causes of OBDII code P0335 in a 2002 Nissan Xterra?
Possible causes of code P0335 in a 2002 Nissan Xterra include a faulty crankshaft position sensor, damaged sensor wiring or connectors, or issues with the sensor's alignment.
4. How can I diagnose the cause of OBDII code P0335 in my 2002 Nissan Xterra?
To diagnose code P0335 in a 2002 Nissan Xterra, you can use a diagnostic scan tool to read the code, visually inspect the sensor and its wiring for damage, and perform testing on the sensor's circuitry.
5. Can a faulty crankshaft position sensor cause code P0335 in a 2002 Nissan Xterra?
Yes, a faulty crankshaft position sensor is a common cause of code P0335 in a 2002 Nissan Xterra as it can result in inaccurate or no signal being sent to the engine control module.
6. How can I repair OBDII code P0335 in my 2002 Nissan Xterra?
To repair code P0335 in a 2002 Nissan Xterra, you may need to replace the faulty crankshaft position sensor, repair damaged wiring or connectors, and clear the trouble code from the vehicle's computer.
7. Are there any troubleshooting tips for addressing code P0335 in a 2002 Nissan Xterra?
When troubleshooting code P0335 in a 2002 Nissan Xterra, ensure the sensor is properly aligned, check for loose or corroded connections, and consider testing the sensor's output signal.
8. Can I continue driving my 2002 Nissan Xterra with OBDII code P0335?
It is not recommended to continue driving a 2002 Nissan Xterra with code P0335 as it can lead to potential engine performance issues and further damage if left unresolved.
9. Is it necessary to reset the ECU after repairing OBDII code P0335 in a 2002 Nissan Xterra?
Yes, it is recommended to reset the ECU after repairing code P0335 in a 2002 Nissan Xterra to clear the trouble code and ensure the vehicle's computer recognizes the repair.
10. How can I prevent OBDII code P0335 from recurring in my 2002 Nissan Xterra?
To prevent code P0335 from recurring in a 2002 Nissan Xterra, regularly inspect and maintain the crankshaft position sensor, ensure proper sensor alignment during installation, and address any wiring issues promptly.
Discuss the causes and fixes for P0335 2002 Nissan Xterra OBDII Code
Code P0335 2002 Nissan Xterra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
