P0335 1997 Honda Civic Code - Crankshaft Position Sensor 'A' No Signal
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 1997 Honda Civic indicates Crankshaft Position Sensor 'A' No Signal.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 1997 Honda Civic Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 1997 Honda Civic?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 1997 Honda Civic?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 1997 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 1997 Honda Civic code?
Need more information on how to fix the P0335 1997 Honda Civic code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 1997 Honda Civic code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 1997 Honda Civic Code
1. What are the common symptoms of OBDII code P0335 in a 1997 Honda Civic?
- Common symptoms include difficulty starting the engine, engine stalling, rough idling, and poor acceleration.
2. What is the usual cause of OBDII code P0335 in a 1997 Honda Civic?
- The most common cause of code P0335 in a 1997 Honda Civic is a faulty crankshaft position sensor 'A' or a related wiring issue.
3. How can I diagnose a crankshaft position sensor issue in my 1997 Honda Civic?
- You can diagnose a crankshaft position sensor issue by performing a visual inspection of the sensor and its wiring, testing the sensor with a multimeter, or using a scan tool to monitor sensor data.
4. Can a faulty crankshaft position sensor cause other problems in a 1997 Honda Civic?
- Yes, a faulty crankshaft position sensor can cause a variety of issues such as misfires, poor fuel economy, and even prevent the engine from starting.
5. Is it safe to continue driving my 1997 Honda Civic with OBDII code P0335?
- It is not recommended to drive your Honda Civic with code P0335 as it can lead to further engine damage and potentially leave you stranded.
6. How much does it typically cost to repair a crankshaft position sensor in a 1997 Honda Civic?
- The cost of replacing a crankshaft position sensor in a 1997 Honda Civic can vary depending on the labor rates and the quality of the sensor, but it typically ranges from $100 to $300.
7. Are there any DIY repair tips for fixing OBDII code P0335 in a 1997 Honda Civic?
- DIY enthusiasts can attempt to replace the crankshaft position sensor themselves by following a repair manual specific to the 1997 Honda Civic and using basic tools.
8. Can a faulty crankshaft position sensor be cleaned or repaired, or does it need to be replaced?
- In most cases, a faulty crankshaft position sensor cannot be repaired or cleaned and needs to be replaced with a new sensor to resolve the issue.
9. Will resetting the OBDII code P0335 in my 1997 Honda Civic make the problem go away?
- Resetting the code may temporarily turn off the check engine light, but it will not fix the underlying issue causing the code to appear.
10. How important is the crankshaft position sensor for the overall performance of a 1997 Honda Civic?
- The crankshaft position sensor is crucial for the engine's performance as it helps the engine control unit determine ignition timing and fuel injection, so it is essential for proper engine operation.
Discuss the causes and fixes for P0335 1997 Honda Civic OBDII Code
Code P0335 1997 Honda Civic comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
