AutoCodesChrysler – P0330 Chrysler

P0330 Chrysler Code - Knock Sensor 2 Circuit

Quick Answer

The knock sensor is attached to the cylinder block. Common causes include Faulty Knock Sensor 2, Knock Sensor 2 circuit poor electrical connection, Knock Sensor 2 harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0330 Chrysler indicates Knock Sensor 2 Circuit .
Common causes
Common causes include Faulty Knock Sensor 2, Knock Sensor 2 circuit poor electrical connection, Knock Sensor 2 harness is open or shorted.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 9,082
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 16, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0330 Chrysler Description

The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).
OBDII Code P0330 Chrysler - Knock Sensor 2 Circuit  - AutoCodes.com
P0330 Chrysler Code - Knock Sensor 2 Circuit

What are the Possible Causes of the DTC P0330 Chrysler?

  • Faulty Knock Sensor 2
  • Knock Sensor 2 circuit poor electrical connection
  • Knock Sensor 2 harness is open or shorted
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0330 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0330 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0330 Chrysler code?

Need more information on how to fix the P0330 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0330 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0330 Chrysler Code

1. What does OBDII code P0330 mean on a Chrysler vehicle?

P0330 indicates a problem with the Knock Sensor 2 Circuit, typically related to the sensor on the engine bank opposite the one with cylinder #1.

2. What are the common symptoms of P0330 in a Chrysler?

Symptoms include engine misfires, reduced fuel efficiency, poor acceleration, unusual engine noises, and illumination of the check engine light.

3. What causes the P0330 code on a Chrysler?

Common causes include a faulty knock sensor, damaged wiring or connectors, poor electrical connections, or an issue with the vehicle’s engine control module (ECM).

4. Can I drive my Chrysler with the P0330 code?

While the vehicle may run, driving with a P0330 code could lead to engine damage due to improper ignition timing and unaddressed knock sensor issues.

5. How can I diagnose the P0330 code on my Chrysler?

Diagnosis typically involves using a scan tool to confirm the code, inspecting the knock sensor and its wiring, checking for physical damage, and testing the sensor’s voltage output.

6. How do I fix the P0330 code on a Chrysler vehicle?

Repairs may include replacing the faulty knock sensor, repairing damaged wiring or connectors, cleaning corroded connections, and updating or reprogramming the ECM if necessary.

7. How much does it cost to fix a P0330 code on a Chrysler?

Costs vary, but replacing a knock sensor typically ranges from $100 to $300, depending on labor and parts prices.

8. Can a bad knock sensor cause engine damage?

Yes, a malfunctioning knock sensor can prevent the ECM from properly adjusting ignition timing, which may lead to engine knocking and long-term damage.

9. What does the knock sensor do in a Chrysler engine?

The knock sensor detects engine vibrations caused by knocking or pre-ignition and sends signals to the ECM to adjust ignition timing accordingly.

10. Will resetting the check engine light fix the P0330 code?

Resetting the light may temporarily clear the code, but the underlying issue needs to be repaired to prevent the code from returning.

Discuss the causes and fixes for P0330 Chrysler OBDII Code

Code P0330 Chrysler comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play