AutoCodes – Nissan – P0328 2006 Nissan Murano

P0328 2006 Nissan Murano Code - Knock Sensor Circuit High Input- Bank 1

Quick Answer

The knock sensor is attached to the cylinder block. Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0328 2006 Nissan Murano indicates Knock Sensor Circuit High Input- Bank 1.
Common causes: Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,602

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0328 2006 Nissan Murano Description

The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).

OBDII Code P0328 2006 Nissan Murano - Knock Sensor Circuit High Input- Bank 1 - AutoCodes.com — P0328 2006 Nissan Murano Code - Knock Sensor Circuit High Input- Bank 1

What does this mean?

What are the Possible Causes of the DTC P0328 2006 Nissan Murano?

Faulty knock sensor
Knock sensor circuit poor electrical connection
Knock sensor harness is open or shorted
Faulty Engine Control Module (ECM)

How to Fix the DTC P0328 2006 Nissan Murano?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0328 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0328 2006 Nissan Murano code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0328 2006 Nissan Murano code?

Need more information on how to fix the P0328 2006 Nissan Murano code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0328 2006 Nissan Murano code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0328 2006 Nissan Murano Code

1. What are the common symptoms of OBDII code P0328 in a 2006 Nissan Murano?

- Common symptoms may include engine hesitation, reduced power, illuminated check engine light, and poor fuel economy.

2. What does the OBDII code P0328 "Knock Sensor Circuit High Input- Bank 1" indicate in a 2006 Nissan Murano?

- This code indicates that the knock sensor in Bank 1 is detecting a high input signal, potentially due to a fault in the sensor or its circuit.

3. What are the possible causes of OBDII code P0328 in a 2006 Nissan Murano?

- Possible causes may include a faulty knock sensor, damaged wiring or connectors in the knock sensor circuit, or issues with the engine control module.

4. How can I diagnose the OBDII code P0328 in my 2006 Nissan Murano?

- Diagnosing this code typically involves checking the condition of the knock sensor, inspecting the sensor wiring and connectors, and testing the sensor's resistance.

5. Can I continue driving my 2006 Nissan Murano with OBDII code P0328?

- It's not recommended to drive with this code as it can lead to engine performance issues and potential long-term damage if not addressed promptly.

6. How can I repair OBDII code P0328 in my 2006 Nissan Murano?

- Repair options may include replacing the knock sensor, repairing the wiring or connectors, or resetting the engine control module after fixing the issue.

7. Is it possible to reset the OBDII code P0328 in a 2006 Nissan Murano without fixing the underlying issue?

- While you can clear the code with an OBDII scanner, it's crucial to address the root cause to prevent the code from reappearing and ensure proper vehicle operation.

8. Will OBDII code P0328 cause any long-term damage to my 2006 Nissan Murano if left unresolved?

- Ignoring this code may lead to reduced engine performance, potential damage to engine components, and continued issues with fuel efficiency if not fixed in a timely manner.

9. How much does it typically cost to repair OBDII code P0328 in a 2006 Nissan Murano?

- The cost can vary depending on the exact cause of the issue, but it may involve parts and labor expenses ranging from $200 to $500 or more at a repair shop.

10. Can a DIY enthusiast with basic automotive knowledge tackle the repair for OBDII code P0328 in a 2006 Nissan Murano?

- Depending on the exact cause, DIY repair may be possible for those with the right tools and skills, such as replacing the knock sensor or repairing simple wiring issues.