AutoCodes – Nissan – P0328 2006 Nissan Maxima

P0328 2006 Nissan Maxima Code - Knock Sensor Circuit High Input- Bank 1

Quick Answer

The knock sensor is attached to the cylinder block. Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0328 2006 Nissan Maxima indicates Knock Sensor Circuit High Input- Bank 1.
Common causes: Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,050

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0328 2006 Nissan Maxima Description

The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).

OBDII Code P0328 2006 Nissan Maxima - Knock Sensor Circuit High Input- Bank 1 - AutoCodes.com — P0328 2006 Nissan Maxima Code - Knock Sensor Circuit High Input- Bank 1

What does this mean?

What are the Possible Causes of the DTC P0328 2006 Nissan Maxima?

Faulty knock sensor
Knock sensor circuit poor electrical connection
Knock sensor harness is open or shorted
Faulty Engine Control Module (ECM)

How to Fix the DTC P0328 2006 Nissan Maxima?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0328 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0328 2006 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0328 2006 Nissan Maxima code?

Need more information on how to fix the P0328 2006 Nissan Maxima code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0328 2006 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0328 2006 Nissan Maxima Code

1. What are the common symptoms of OBDII code P0328 in a 2006 Nissan Maxima?

- Common symptoms include engine knocking or pinging noises, reduced engine performance, and sometimes the illumination of the check engine light.

2. What are the possible causes of the Knock Sensor Circuit High Input - Bank 1 error code in a 2006 Nissan Maxima?

- The code P0328 in a 2006 Nissan Maxima is often caused by a faulty knock sensor, damaged wiring harness, or issues with the engine control module (ECM).

3. How can I diagnose the Knock Sensor Circuit High Input error code in my 2006 Nissan Maxima?

- Diagnosing this code involves checking the knock sensor and its wiring for any visible damage, conducting a continuity test, and using a multimeter to check for proper sensor operation.

4. Can I still drive my 2006 Nissan Maxima with the P0328 code?

- While you may be able to drive your vehicle with this code, it is not recommended as it can lead to engine damage and reduced performance. It's best to address the issue promptly.

5. Are there any DIY repair tips for fixing the P0328 code in a 2006 Nissan Maxima?

- DIY repair tips include inspecting the knock sensor wiring for breaks or shorts, ensuring proper sensor connections, and checking for any corrosion that may be affecting the sensor's performance.

6. How much does it typically cost to repair the Knock Sensor Circuit High Input error in a 2006 Nissan Maxima?

- The cost of repairing the P0328 code can vary depending on the exact cause of the issue. On average, expect to pay between $200 to $500 for parts and labor.

7. Will resetting the check engine light resolve the P0328 code in my 2006 Nissan Maxima?

- Simply resetting the check engine light will not fix the underlying issue causing the P0328 code. It's important to diagnose and address the root cause of the problem.

8. How often should the knock sensor be replaced in a 2006 Nissan Maxima?

- The knock sensor in a 2006 Nissan Maxima should be inspected regularly as part of routine maintenance. If a fault is detected, it should be replaced promptly to avoid potential engine damage.

9. Can a faulty knock sensor cause other problems in a 2006 Nissan Maxima?

- Yes, a faulty knock sensor can lead to issues such as reduced fuel efficiency, engine misfires, and potential damage to the engine if not addressed in a timely manner.

10. Is it safe to continue driving my 2006 Nissan Maxima if I suspect a knock sensor issue?

- It is not recommended to drive your vehicle if you suspect a knock sensor issue, as it can lead to more severe engine problems over time. It's best to have the issue diagnosed and repaired as soon as possible.