AutoCodes – Nissan – P0328 2005 Nissan Pathfinder

P0328 2005 Nissan Pathfinder Code - Knock Sensor Circuit High Input- Bank 1

Quick Answer

The knock sensor is attached to the cylinder block. Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0328 2005 Nissan Pathfinder indicates Knock Sensor Circuit High Input- Bank 1.
Common causes
Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 10,322
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0328 2005 Nissan Pathfinder Description

The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).
OBDII Code P0328 2005 Nissan Pathfinder - Knock Sensor Circuit High Input- Bank 1 - AutoCodes.com
P0328 2005 Nissan Pathfinder Code - Knock Sensor Circuit High Input- Bank 1

What are the Possible Causes of the DTC P0328 2005 Nissan Pathfinder?

  • Faulty knock sensor
  • Knock sensor circuit poor electrical connection
  • Knock sensor harness is open or shorted
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0328 2005 Nissan Pathfinder?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0328 2005 Nissan Pathfinder code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0328 2005 Nissan Pathfinder code?

Need more information on how to fix the P0328 2005 Nissan Pathfinder code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0328 2005 Nissan Pathfinder code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0328 2005 Nissan Pathfinder Code

1. What are the common symptoms of OBDII code P0328 on a 2005 Nissan Pathfinder?

- Common symptoms include reduced engine performance, knocking noises from the engine, and the illumination of the Check Engine light.

2. What does the OBDII code P0328 "Knock Sensor Circuit High Input- Bank 1" mean?

- This code indicates that the knock sensor in Bank 1 of the engine is detecting a higher-than-normal voltage input, which can lead to engine performance issues.

3. What are the possible causes of OBDII code P0328 on a 2005 Nissan Pathfinder?

- Possible causes include a faulty knock sensor, wiring issues in the knock sensor circuit, poor electrical connections, or a problem with the Engine Control Module (ECM).

4. How can I diagnose the cause of OBDII code P0328 on my 2005 Nissan Pathfinder?

- Diagnosis typically involves checking the knock sensor and its wiring for any signs of damage, testing the sensor's resistance, and inspecting the ECM for faults using a diagnostic scanner.

5. Can I continue driving my 2005 Nissan Pathfinder with OBDII code P0328 present?

- It is not recommended to drive the vehicle with this code present, as it can lead to engine damage and reduced performance over time. It is best to diagnose and repair the issue promptly.

6. How can I repair OBDII code P0328 on a 2005 Nissan Pathfinder?

- Repair may involve replacing the knock sensor, repairing any damaged wiring, ensuring proper electrical connections, or reprogramming the ECM if necessary.

7. Is it possible to reset the Check Engine light after fixing OBDII code P0328 on a 2005 Nissan Pathfinder?

- Yes, once the issue causing the code has been repaired, the Check Engine light can be reset using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes.

8. Are there any preventative maintenance tips to avoid OBDII code P0328 on a 2005 Nissan Pathfinder?

- Regularly inspecting and maintaining the knock sensor and its wiring, as well as following the manufacturer's recommended service intervals, can help prevent issues that trigger this code.

9. Can extreme weather conditions contribute to triggering OBDII code P0328 on a 2005 Nissan Pathfinder?

- Yes, extreme temperatures or environmental conditions can sometimes affect the knock sensor's performance, leading to false readings and potentially triggering this code.

10. Will fixing OBDII code P0328 improve the fuel efficiency of my 2005 Nissan Pathfinder?

- Yes, resolving issues related to this code, such as improving engine performance and reducing knocking noises, can lead to better fuel efficiency in the vehicle.

Discuss the causes and fixes for P0328 2005 Nissan Pathfinder OBDII Code

  • Hi, I had my timing chain done, will this cause this code to come up if it was an issue with the timing. 05 pathfinder. Vehicle turn on and ran fine for a good 20m but then stall out and now this code. Would like your feed back thanks.

  • Unfortunately the problem is more than likely with the timing chain installation. It's really difficult to set the timing on that engine. The code may set because the timing was set too advance.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play