AutoCodesNissan – P0328 2002 Nissan Sentra

P0328 2002 Nissan Sentra Code - Knock Sensor Circuit High Input- Bank 1

Quick Answer

The knock sensor is attached to the cylinder block. Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0328 2002 Nissan Sentra indicates Knock Sensor Circuit High Input- Bank 1.
Common causes
Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 4,898
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0328 2002 Nissan Sentra Description

The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).
OBDII Code P0328 2002 Nissan Sentra - Knock Sensor Circuit High Input- Bank 1 - AutoCodes.com
P0328 2002 Nissan Sentra Code - Knock Sensor Circuit High Input- Bank 1

What are the Possible Causes of the DTC P0328 2002 Nissan Sentra?

  • Faulty knock sensor
  • Knock sensor circuit poor electrical connection
  • Knock sensor harness is open or shorted
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0328 2002 Nissan Sentra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0328 2002 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0328 2002 Nissan Sentra code?

Need more information on how to fix the P0328 2002 Nissan Sentra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0328 2002 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0328 2002 Nissan Sentra Code

What does the OBDII code P0328 mean on a 2002 Nissan Sentra?

Code P0328 indicates a “Knock Sensor Circuit High Input – Bank 1,” meaning the knock sensor has detected an unusually high voltage signal, which may indicate a malfunction.

What are the symptoms of code P0328 in a 2002 Nissan Sentra?

Common symptoms include poor engine performance, reduced fuel efficiency, engine knocking or pinging, and the Check Engine Light illuminating.

What causes the P0328 code to appear in a 2002 Nissan Sentra?

Common causes include a faulty knock sensor, damaged or corroded wiring, loose sensor connections, or an issue with the engine control module (ECM).

Can I drive my 2002 Nissan Sentra with a P0328 code?

While it may be possible to drive with this code, ignoring it can lead to reduced performance, increased fuel consumption, and potential long-term engine damage.

How do I diagnose a P0328 code on my 2002 Nissan Sentra?

Start by inspecting the knock sensor and its wiring for damage or corrosion. Use a multimeter to test the sensor’s resistance and check for proper voltage signals from the ECM.

How do I fix the P0328 code in a 2002 Nissan Sentra?

Repairs may involve replacing the knock sensor, repairing or replacing damaged wiring, securing loose connections, or, in rare cases, reprogramming or replacing the ECM.

Where is the knock sensor located on a 2002 Nissan Sentra?

The knock sensor is typically located on the engine block, cylinder head, or intake manifold, usually near the center of the engine.

What tools are needed to fix the P0328 code in a 2002 Nissan Sentra?

Common tools include a multimeter, socket set, wiring repair kit, and potentially a scan tool to clear the code after repairs.

How much does it cost to fix a P0328 code on a 2002 Nissan Sentra?

The cost varies depending on the repair. Replacing a knock sensor typically costs between $150 and $400, including parts and labor.

Can a bad knock sensor cause engine damage in my 2002 Nissan Sentra?

Yes, a faulty knock sensor may fail to detect engine knocking, potentially leading to pre-ignition or detonation, which can cause engine damage if not addressed.

Discuss the causes and fixes for P0328 2002 Nissan Sentra OBDII Code

Code P0328 2002 Nissan Sentra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play