AutoCodes – Toyota – P0327 2013 Toyota RAV4

P0327 2013 Toyota RAV4 Code - Knock Sensor 1 Circuit Low Input

Quick Answer

A flat-type knock control sensor (non-resonant type) has a structure that can detect vibrations between approximately 5 kHz and 15 kHz. Common causes include Faulty Knock Sensor, Knock Sensor circuit poor electrical connection, Knock Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0327 2013 Toyota RAV4 indicates Knock Sensor 1 Circuit Low Input.
Common causes: Common causes include Faulty Knock Sensor, Knock Sensor circuit poor electrical connection, Knock Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 743

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 25, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0327 2013 Toyota RAV4 Description

A flat-type knock control sensor (non-resonant type) has a structure that can detect vibrations between approximately 5 kHz and 15 kHz. The knock control sensor is fitted onto the engine block to detect engine knocking. The knock control sensor contains a piezoelectric element that generates a voltage when it becomes deformed. The voltage is generated when the engine block vibrates due to knocking. Any occurrence of engine knocking can be suppressed by delaying the ignition timing.
If the output voltage transmitted by the knock control sensor remains low or high for 1 second or more, the Engine Control Module (ECM) interprets this as a malfunction in the sensor circuit and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0327 2013 Toyota RAV4 - Knock Sensor 1 Circuit Low Input - AutoCodes.com — P0327 2013 Toyota RAV4 Code - Knock Sensor 1 Circuit Low Input

What does this mean?

What are the Possible Causes of the DTC P0327 2013 Toyota RAV4?

Faulty Knock Sensor
Knock Sensor circuit poor electrical connection
Knock Sensor harness is open or shorted
Faulty Engine Control Module (ECM)

How to Fix the DTC P0327 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0327 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0327 2013 Toyota RAV4 code?

Need more information on how to fix the P0327 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0327 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0327 2013 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P0327 in a 2013 Toyota RAV4?

- Common symptoms include poor engine performance, reduced fuel efficiency, and potential engine knocking noises.

2. What does the OBDII code P0327 "Knock Sensor 1 Circuit Low Input" in a 2013 Toyota RAV4 indicate?

- This code indicates that the knock sensor in bank 1 of the engine is detecting a low voltage signal.

3. What are the possible causes of the P0327 code in a 2013 Toyota RAV4?

- Potential causes include a faulty knock sensor, damaged wiring or connectors in the knock sensor circuit, or issues with the engine control module (ECM).

4. How can I diagnose the P0327 code in my 2013 Toyota RAV4?

- Diagnosing the code involves inspecting the knock sensor, checking the wiring for any damage, and testing the sensor's voltage output using a multimeter.

5. Can driving with the P0327 code present cause further damage to my 2013 Toyota RAV4?

- While driving with this code may not immediately harm the vehicle, prolonged driving can potentially lead to engine damage or reduced performance.

6. How should I repair the P0327 code in my 2013 Toyota RAV4?

- Repair typically involves replacing the faulty knock sensor, repairing any damaged wiring, or addressing issues with the ECM if necessary.

7. Are there any DIY tips for fixing the P0327 code in a 2013 Toyota RAV4?

- While some may attempt to replace the knock sensor themselves, it's recommended to consult a professional mechanic due to the sensor's location and potential complexities.

8. How much does it cost to repair the P0327 code in a 2013 Toyota RAV4?

- The cost of repair can vary depending on the exact cause of the issue, but it typically ranges from $200 to $500, including parts and labor.

9. Can resetting the OBDII system clear the P0327 code in a 2013 Toyota RAV4?

- Resetting the system may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear after driving the vehicle.

10. How often should the knock sensor be replaced in a 2013 Toyota RAV4?

- The knock sensor does not have a specific replacement interval, but it is recommended to replace it when it fails or shows signs of malfunction to ensure optimal engine performance.