AutoCodesNissan – P0327 2010 Nissan Pathfinder

P0327 2010 Nissan Pathfinder Code - Knock Sensor Circuit Low Input Bank 1

Quick Answer

The knock sensor is attached to the cylinder block. Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0327 2010 Nissan Pathfinder indicates Knock Sensor Circuit Low Input Bank 1.
Common causes
Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,130
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0327 2010 Nissan Pathfinder Description

The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).
OBDII Code P0327 2010 Nissan Pathfinder - Knock Sensor Circuit Low Input Bank 1 - AutoCodes.com
P0327 2010 Nissan Pathfinder Code - Knock Sensor Circuit Low Input Bank 1

What are the Possible Causes of the DTC P0327 2010 Nissan Pathfinder?

  • Faulty knock sensor
  • Knock sensor circuit poor electrical connection
  • Knock sensor harness is open or shorted
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0327 2010 Nissan Pathfinder?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0327 2010 Nissan Pathfinder code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0327 2010 Nissan Pathfinder code?

Need more information on how to fix the P0327 2010 Nissan Pathfinder code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0327 2010 Nissan Pathfinder code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0327 2010 Nissan Pathfinder Code

1. What does the OBDII code P0327 mean on a 2010 Nissan Pathfinder?

P0327 indicates the Knock Sensor Circuit Low Input on Bank 1, meaning the engine control module (ECM) is detecting an unusually low voltage signal from the knock sensor.

2. What are the symptoms of a P0327 code on a 2010 Nissan Pathfinder?

Common symptoms include reduced engine performance, poor fuel efficiency, engine knocking or pinging, and possibly an illuminated check engine light.

3. What causes the P0327 code in a 2010 Nissan Pathfinder?

Common causes include a faulty knock sensor, damaged knock sensor wiring or connectors, excessive engine vibrations, or issues with the ECM.

4. Can I still drive my 2010 Nissan Pathfinder with a P0327 code?

While the vehicle may still operate, driving with this code can lead to engine damage due to improper ignition timing and knocking. It’s best to address the issue promptly.

5. How do I diagnose a P0327 code in my 2010 Nissan Pathfinder?

Diagnosis involves inspecting the knock sensor and its wiring for damage, checking the sensor’s resistance with a multimeter, and testing for proper voltage at the sensor connector.

6. Where is the knock sensor located on a 2010 Nissan Pathfinder?

The knock sensor is typically located on the engine block, cylinder head, or intake manifold, close to Bank 1 (the side of the engine with cylinder 1).

7. How much does it cost to fix a P0327 code on a 2010 Nissan Pathfinder?

Repair costs vary but typically range from $150 to $400, depending on whether it’s just the sensor or if wiring and labor add to the expense.

8. Can a bad knock sensor damage my engine?

Yes, a failing knock sensor can prevent the ECM from detecting engine knocking, leading to potential engine damage over time if not repaired.

9. What tools are needed to fix a P0327 code on a 2010 Nissan Pathfinder?

You’ll need a multimeter, OBDII scanner, basic hand tools, and potentially a replacement knock sensor to diagnose and repair the issue.

10. How can I prevent a P0327 code from occurring again?

Regular maintenance, ensuring proper engine operation, and promptly repairing any engine issues can help prevent future knock sensor problems.

Discuss the causes and fixes for P0327 2010 Nissan Pathfinder OBDII Code

Code P0327 2010 Nissan Pathfinder comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play