AutoCodes – Toyota – P0327 2004 Toyota Prius

P0327 2004 Toyota Prius Code - Knock Sensor 1 Circuit Low Input

Quick Answer

The knock sensor is attached to the cylinder block. Common causes include Faulty Knock Sensor, Knock Sensor circuit poor electrical connection, Knock Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0327 2004 Toyota Prius indicates Knock Sensor 1 Circuit Low Input.
Common causes: Common causes include Faulty Knock Sensor, Knock Sensor circuit poor electrical connection, Knock Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,822

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 16, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0327 2004 Toyota Prius Description

The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).

OBDII Code P0327 2004 Toyota Prius - Knock Sensor 1 Circuit Low Input - AutoCodes.com — P0327 2004 Toyota Prius Code - Knock Sensor 1 Circuit Low Input

What does this mean?

What are the Possible Causes of the DTC P0327 2004 Toyota Prius?

Faulty Knock Sensor
Knock Sensor circuit poor electrical connection
Knock Sensor harness is open or shorted
Faulty Engine Control Module (ECM)

How to Fix the DTC P0327 2004 Toyota Prius?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0327 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0327 2004 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0327 2004 Toyota Prius code?

Need more information on how to fix the P0327 2004 Toyota Prius code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0327 2004 Toyota Prius code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0327 2004 Toyota Prius Code

1. What does the OBDII code P0327 indicate on a 2004 Toyota Prius?

The P0327 code indicates that the Knock Sensor 1 in Bank 1 has detected a signal that is outside the normal range, specifically it is lower than expected.

2. What symptoms might I notice if my 2004 Toyota Prius shows a P0327 code?

Symptoms can include a decrease in engine performance, poor fuel economy, rough engine idle, and in some cases, the engine may exhibit audible knocking sounds.

3. What can cause a P0327 code to appear on my 2004 Toyota Prius?

Common causes include a faulty knock sensor, wiring issues such as shorts or frays leading to the sensor, or a problem with the engine control module (ECM).

4. How can I fix the P0327 code on my 2004 Toyota Prius?

Fixing the P0327 code typically involves inspecting and possibly replacing the knock sensor, repairing any damaged wires or connectors, and ensuring the sensor is properly grounded.

5. Is it safe to drive my 2004 Toyota Prius with a P0327 code?

Driving with a P0327 code is not recommended as it can lead to further damage to the engine, especially if the knocking condition is not addressed promptly.

6. How urgent is it to address a P0327 code in a 2004 Toyota Prius?

It is relatively urgent to address this issue to avoid potential engine damage, especially if the vehicle is experiencing knocking sounds or noticeable performance issues.

7. What tools are required to diagnose the P0327 code on a 2004 Toyota Prius?

Diagnosing this code typically requires an OBDII scanner, a digital multimeter, and a basic set of hand tools to access and test the knock sensor and associated wiring.

8. Can a faulty knock sensor affect the fuel economy of my 2004 Toyota Prius?

Yes, a faulty knock sensor can lead to improper engine timing adjustments by the ECM, which can decrease fuel efficiency.

9. How do I test the knock sensor on my 2004 Toyota Prius if I suspect it's causing the P0327 code?

To test the knock sensor, use a digital multimeter set to resistance mode to check for continuity and proper resistance according to the manufacturer's specifications. Also, visually inspect the sensor for cracks or damage.