AutoCodes – Toyota – P0304 2013 Toyota RAV4

P0304 2013 Toyota RAV4 Code - Cylinder 4 Misfire Detected

Quick Answer

When the engine misfires, high concentrations of Hydrocarbons (HC) enter the exhaust gas. Common causes include Intake air leak, Faulty spark plug #4, Faulty ignition coil #4. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0304 2013 Toyota RAV4 indicates Cylinder 4 Misfire Detected.
Common causes: Common causes include Intake air leak, Faulty spark plug #4, Faulty ignition coil #4.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 620

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 25, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0304 2013 Toyota RAV4 Description

When the engine misfires, high concentrations of Hydrocarbons (HC) enter the exhaust gas. Extremely high hydrocarbon concentration levels can cause an increase in exhaust emission levels. Extremely high concentrations of hydrocarbons can also cause increases in the three-way catalytic converter temperature, which may cause damage to the three-way catalytic converter. To prevent this increase in emissions and to limit the possibility of thermal damage, the Engine Control Module (ECM) monitors the misfire count. When the temperature of the three-way catalytic converter reaches the point of thermal degradation, the ECM blinks the MIL. To monitor misfires, the ECM uses both the camshaft position sensor and the crankshaft position sensor. The camshaft position sensor is used to identify any misfiring cylinders and the crankshaft position sensor is used to measure variations in the crankshaft rotation speed. Misfires are counted when the crankshaft rotation speed variations exceed predetermined thresholds. If the misfire count exceeds the threshold levels and could cause emission control system performance deterioration, the ECM illuminates the MIL and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0304 2013 Toyota RAV4 - Cylinder 4 Misfire Detected - AutoCodes.com — P0304 2013 Toyota RAV4 Code - Cylinder 4 Misfire Detected

What does this mean?

What are the Possible Causes of the DTC P0304 2013 Toyota RAV4?

Intake air leak
Faulty spark plug #4
Faulty ignition coil #4
Clogged or faulty fuel injector #4
Fuel injectors #4 harness is open or shorted
Fuel Injectors #4 circuit poor electrical connection
Ignition coils #4 harness is open or shorted
Ignition coils #4 circuit poor electrical connection
Incorrect Fuel pressure
Faulty Mass Air Flow (MAF) Sensor
Faulty Engine Control Module (ECM)
Faulty Engine Coolant Temperature (ECT) Sensor

How to Fix the DTC P0304 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0304 code means that cylinder #4 is misfiring or is randomly misfiring. Start by checking for intake leaks and if no leaks are found the next step is to replace the spark plugs on cylinder #4. If the problem persists more tests need to be done to diagnose the problem. See "Possible Causes" for the most common problems.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0304 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0304 2013 Toyota RAV4 code?

Need more information on how to fix the P0304 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0304 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0304 2013 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P0304 (Cylinder 4 Misfire Detected) in a 2013 Toyota RAV4?

Common symptoms include rough idling, engine vibrations, loss of power, and potential increase in fuel consumption.

2. What are the possible causes of a cylinder 4 misfire in a 2013 Toyota RAV4?

Potential causes include faulty spark plugs, ignition coil issues, vacuum leaks, fuel injector problems, or low compression in the cylinder.

3. How can I diagnose the specific cause of a cylinder 4 misfire in my 2013 Toyota RAV4?

Diagnostic steps may include checking spark plugs, inspecting ignition coils, performing a compression test, scanning for other trouble codes, and looking for vacuum leaks.

4. Can driving with a misfiring cylinder 4 in a 2013 Toyota RAV4 cause further damage?

Continuing to drive with a misfire can lead to damage to the catalytic converter, oxygen sensor, and other engine components, so it's best to address the issue promptly.

5. How can I repair a cylinder 4 misfire in my 2013 Toyota RAV4?

Repairs may involve replacing spark plugs, ignition coils, fuel injectors, addressing vacuum leaks, performing a compression test, or seeking professional help for thorough diagnosis and repair.

6. Is it safe to drive my 2013 Toyota RAV4 with OBDII code P0304 (Cylinder 4 Misfire Detected)?

It's generally not recommended to drive with a misfire as it can lead to further damage and potential safety hazards. It's best to have the issue addressed as soon as possible.

7. Can a dirty or clogged fuel injector cause a cylinder 4 misfire in a 2013 Toyota RAV4?

Yes, a dirty or clogged fuel injector can disrupt the fuel-air mixture and lead to a misfire in the affected cylinder.

8. How much does it typically cost to repair a cylinder 4 misfire in a 2013 Toyota RAV4?

The cost of repair can vary depending on the specific cause of the misfire and whether you perform the repairs yourself or seek professional help. Costs can range from a few hundred to over a thousand dollars.

9. Will resetting the OBDII code P0304 in my 2013 Toyota RAV4 make the issue go away?

Resetting the code may temporarily clear the warning light, but it won't fix the underlying issue causing the misfire. It's important to diagnose and address the root cause of the problem.

10. How often should I check and replace spark plugs in my 2013 Toyota RAV4 to prevent cylinder misfires?

It's generally recommended to inspect and replace spark plugs every 30,000 to 100,000 miles, depending on the type of spark plugs used and driving conditions. Regular maintenance can help prevent cylinder misfires.