AutoCodes.com
Login with Google
AutoCodes – Toyota – P0302 2018 Toyota RAV4

P0302 2018 Toyota RAV4 Code - Cylinder 2 Misfire Detected

Quick Answer

When the engine misfires, high concentrations of Hydrocarbons (HC) enter the exhaust gas. Common causes include Intake air leak, Faulty spark plug #2, Faulty ignition coil #2. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0302 2018 Toyota RAV4 indicates Cylinder 2 Misfire Detected.
Common causes
Common causes include Intake air leak, Faulty spark plug #2, Faulty ignition coil #2.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Save to My Repairs Step-by-Step Diagnostic Guide My Repairs
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 440
How popular is this code, among other codes? Low
What is this?
Table of contents Created and updated by William Orellana on Aug 25, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0302 2018 Toyota RAV4 Description

When the engine misfires, high concentrations of Hydrocarbons (HC) enter the exhaust gas. Extremely high hydrocarbon concentration levels can cause an increase in exhaust emission levels. Extremely high concentrations of hydrocarbons can also cause increases in the three-way catalytic converter temperature, which may cause damage to the three-way catalytic converter. To prevent this increase in emissions and to limit the possibility of thermal damage, the Engine Control Module (ECM) monitors the misfire count. When the temperature of the three-way catalytic converter reaches the point of thermal degradation, the ECM blinks the MIL. To monitor misfires, the ECM uses both the camshaft position sensor and the crankshaft position sensor. The camshaft position sensor is used to identify any misfiring cylinders and the crankshaft position sensor is used to measure variations in the crankshaft rotation speed. Misfires are counted when the crankshaft rotation speed variations exceed predetermined thresholds. If the misfire count exceeds the threshold levels and could cause emission control system performance deterioration, the ECM illuminates the MIL and stores a Diagnostic Trouble Code (DTC).
OBDII Code P0302 2018 Toyota RAV4 - Cylinder 2 Misfire Detected - AutoCodes.com
P0302 2018 Toyota RAV4 Code - Cylinder 2 Misfire Detected
What does this mean?

What are the Possible Causes of the DTC P0302 2018 Toyota RAV4?

  • Intake air leak
  • Faulty spark plug #2
  • Faulty ignition coil #2
  • Clogged or faulty fuel injector #2
  • Fuel injectors #2 harness is open or shorted
  • Fuel Injectors #2 circuit poor electrical connection
  • Ignition coils #2 harness is open or shorted
  • Ignition coils #2 circuit poor electrical connection
  • Incorrect Fuel pressure
  • Faulty Mass Air Flow (MAF) Sensor
  • Faulty Engine Control Module (ECM)
  • Faulty Engine Coolant Temperature (ECT) Sensor

How to Fix the DTC P0302 2018 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0302 code means that cylinder #2 is misfiring or is randomly misfiring. Start by checking for intake leaks and if no leaks are found the next step is to replace the spark plugs on cylinder #2. If the problem persists more tests need to be done to diagnose the problem. See "Possible Causes" for the most common problems.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0302 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0302 2018 Toyota RAV4 code?

Need more information on how to fix the P0302 2018 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0302 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0302 2018 Toyota RAV4 Code

1. What does the OBDII code P0302 mean for a 2018 Toyota RAV4?

P0302 indicates a misfire has been detected in cylinder 2 of the engine.

2. What are the symptoms of a P0302 code on a 2018 Toyota RAV4?

Symptoms may include rough idling, reduced engine performance, hesitation during acceleration, and the check engine light turning on.

3. What causes the P0302 code on a 2018 Toyota RAV4?

Common causes include faulty spark plugs, a bad ignition coil, fuel injector issues, vacuum leaks, or low cylinder compression.

4. Can driving with a P0302 code damage my 2018 Toyota RAV4?

Yes, prolonged driving with a misfire can cause damage to the catalytic converter and other engine components.

5. How can I fix the P0302 code on my 2018 Toyota RAV4?

Repairs may include replacing the spark plug or ignition coil for cylinder 2, cleaning or replacing the fuel injector, or addressing any vacuum leaks.

6. How do I diagnose the P0302 code on a 2018 Toyota RAV4?

Start by inspecting the spark plug, ignition coil, and fuel injector on cylinder 2, and check for vacuum leaks or compression issues.

7. How much does it cost to repair a P0302 code on a 2018 Toyota RAV4?

Costs vary depending on the issue, but replacing a spark plug or ignition coil may range from $100 to $300, while more extensive repairs like fixing compression issues can cost significantly more.

8. Can a dirty fuel injector cause a P0302 code on a 2018 Toyota RAV4?

Yes, a clogged or malfunctioning fuel injector can disrupt fuel delivery to cylinder 2, leading to a misfire.

9. Do I need special tools to fix the P0302 code on a 2018 Toyota RAV4?

Basic tools like a socket wrench are often sufficient for replacing spark plugs or ignition coils, but diagnosing fuel or compression issues may require specialized equipment.

10. Will resetting the check engine light fix the P0302 code on a 2018 Toyota RAV4?

No, resetting the light without addressing the underlying issue will likely cause the code to return. Proper diagnosis and repair are necessary.

Discuss the causes and fixes for P0302 2018 Toyota RAV4 OBDII Code

Submit a New Comment

Code P0302 2018 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play