P0302 2012 Ford Fusion Code - Cylinder 2 Misfire Detected
Quick Answer
Misfire is defined as a lack of combustion in a cylinder due to the absence of a spark, incorrect fuel metering, low compression, or any other cause. Common causes include Faulty Spark Plug #2, Clogged or faulty Fuel Injector #2, Faulty Ignition Coil #2. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0302 2012 Ford Fusion indicates Cylinder 2 Misfire Detected.
- Common causes
- Common causes include Faulty Spark Plug #2, Clogged or faulty Fuel Injector #2, Faulty Ignition Coil #2.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0302 2012 Ford Fusion Description
When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, the Engine Control Module (ECM) can determine that a misfire is occurring.
The Malfunction Indicator Lamp (MIL) blinks once per second when detecting a misfire severe enough to cause catalyst damage. If the MIL is in a steady state due to a misfire, this indicates the threshold for emissions was exceeded and caused the vehicle to fail an inspection and maintenance tailpipe test.
This Diagnostic Trouble Code (DTC) sets when the misfire detection monitor detects an engine misfire in cylinder 2.
What are the Possible Causes of the DTC P0302 2012 Ford Fusion?
- Faulty Spark Plug #2
- Clogged or faulty Fuel Injector #2
- Faulty Ignition Coil #2
- Fuel Injector #2 harness is open or shorted
- Fuel Injector #2 circuit poor electrical connection
- Ignition Coil #2 harness is open or shorted
- Ignition Coil #2 circuit poor electrical connection
- Insufficient cylinder 2 compression
- Incorrect fuel pressure
- Intake air leak
How to Fix the DTC P0302 2012 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0302 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0302 2012 Ford Fusion code?
Need more information on how to fix the P0302 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0302 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0302 2012 Ford Fusion Code
1. What does OBDII code P0302 on a 2012 Ford Fusion indicate?
- OBDII code P0302 means a Cylinder 2 Misfire Detected in the engine.
2. What are the common symptoms of a cylinder 2 misfire in a 2012 Ford Fusion?
- Common symptoms include rough idling, loss of power, engine vibration, and potentially increased fuel consumption.
3. What are the possible causes of a cylinder 2 misfire in a 2012 Ford Fusion?
- Potential causes include faulty spark plugs, a malfunctioning ignition coil, clogged fuel injector, vacuum leaks, or low compression in the cylinder.
4. How can I diagnose the cause of a cylinder 2 misfire in my 2012 Ford Fusion?
- Diagnostic steps may include inspecting spark plugs, checking ignition coils, testing fuel injectors, performing a compression test, and scanning for other related trouble codes.
5. Is it safe to drive my 2012 Ford Fusion with a cylinder 2 misfire?
- It's not recommended to drive the vehicle with a misfiring cylinder as it can lead to further damage to the engine and emissions system.
6. Can I repair a cylinder 2 misfire in my 2012 Ford Fusion myself?
- Depending on your mechanical skills, you may be able to replace spark plugs or ignition coils yourself, but more complex issues may require professional diagnosis and repair.
7. How much does it typically cost to repair a cylinder 2 misfire in a 2012 Ford Fusion?
- The cost can vary depending on the root cause of the misfire, but repairs may range from a simple spark plug replacement (around $100) to more extensive repairs costing several hundred dollars.
8. Will resetting the OBDII code P0302 on my 2012 Ford Fusion make the issue go away?
- Resetting the code may temporarily clear the warning light, but it will not fix the underlying issue causing the cylinder 2 misfire.
9. How often should I have my 2012 Ford Fusion's engine checked for potential misfires?
- Regular maintenance, including periodic engine inspections and tune-ups, can help prevent and detect issues like cylinder misfires before they become more severe.
10. Can a cylinder 2 misfire in a 2012 Ford Fusion affect the vehicle's overall performance?
- Yes, a cylinder misfire can lead to reduced engine performance, decreased fuel efficiency, increased emissions, and potential damage to other engine components if left unresolved.
Discuss the causes and fixes for P0302 2012 Ford Fusion OBDII Code
Code P0302 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
