P0302 2011 Ford Fusion Code - Cylinder 2 Misfire Detected
Quick Answer
Misfire is defined as a lack of combustion in a cylinder due to the absence of a spark, incorrect fuel metering, low compression, or any other cause. Common causes include Faulty Spark Plug #2, Clogged or faulty Fuel Injector #2, Faulty Ignition Coil #2. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0302 2011 Ford Fusion indicates Cylinder 2 Misfire Detected.
- Common causes
- Common causes include Faulty Spark Plug #2, Clogged or faulty Fuel Injector #2, Faulty Ignition Coil #2.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0302 2011 Ford Fusion Description
When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, the Engine Control Module (ECM) can determine that a misfire is occurring.
The Malfunction Indicator Lamp (MIL) blinks once per second when detecting a misfire severe enough to cause catalyst damage. If the MIL is in a steady state due to a misfire, this indicates the threshold for emissions was exceeded and caused the vehicle to fail an inspection and maintenance tailpipe test.
This Diagnostic Trouble Code (DTC) sets when the misfire detection monitor detects an engine misfire in cylinder 2.
What are the Possible Causes of the DTC P0302 2011 Ford Fusion?
- Faulty Spark Plug #2
- Clogged or faulty Fuel Injector #2
- Faulty Ignition Coil #2
- Fuel Injector #2 harness is open or shorted
- Fuel Injector #2 circuit poor electrical connection
- Ignition Coil #2 harness is open or shorted
- Ignition Coil #2 circuit poor electrical connection
- Insufficient cylinder 2 compression
- Incorrect fuel pressure
- Intake air leak
How to Fix the DTC P0302 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0302 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0302 2011 Ford Fusion code?
Need more information on how to fix the P0302 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0302 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0302 2011 Ford Fusion Code
1. What are common symptoms of OBDII code P0302 on a 2011 Ford Fusion?
- Common symptoms include rough idling, loss of power, engine misfires, and potentially increased fuel consumption.
2. What does the OBDII code P0302 on a 2011 Ford Fusion indicate?
- The code P0302 specifically points to a misfire detected in cylinder 2 of the engine.
3. What are some possible causes of a cylinder 2 misfire in a 2011 Ford Fusion?
- Common causes include faulty spark plugs, ignition coils, fuel injectors, vacuum leaks, or issues with the engine's compression.
4. How can I troubleshoot a cylinder 2 misfire in my 2011 Ford Fusion?
- Start by checking the spark plugs, ignition coils, and fuel injectors for any signs of wear or damage. Also, ensure there are no vacuum leaks in the intake system.
5. Can driving with a cylinder 2 misfire OBDII code P0302 damage my 2011 Ford Fusion?
- Continuing to drive with a misfire can potentially cause damage to the catalytic converter over time, so it's best to address the issue promptly.
6. Is it safe to continue driving my 2011 Ford Fusion with OBDII code P0302 until I can get it repaired?
- It's not recommended to drive for an extended period with a misfire as it can lead to further damage and potentially unsafe driving conditions.
7. How much does it typically cost to repair a cylinder 2 misfire OBDII code P0302 on a 2011 Ford Fusion?
- The cost of repairs can vary depending on the exact cause of the misfire, but it may range from a simple fix like replacing spark plugs to more complex issues like replacing ignition coils.
8. Can I clear the OBDII code P0302 on my 2011 Ford Fusion by disconnecting the battery?
- While disconnecting the battery may clear the code temporarily, it's important to address the underlying issue causing the misfire to prevent the code from reoccurring.
9. Will OBDII code P0302 on a 2011 Ford Fusion reset itself after a certain number of drive cycles?
- If the underlying issue causing the misfire is resolved, the code may reset itself after several successful drive cycles without detecting the misfire.
10. Should I take my 2011 Ford Fusion to a mechanic for diagnosis and repair when OBDII code P0302 appears?
- It's advisable to have a qualified mechanic diagnose and repair the issue to ensure it is properly resolved and to prevent any further damage to the vehicle.
Discuss the causes and fixes for P0302 2011 Ford Fusion OBDII Code
Code P0302 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
