AutoCodesFord – P0297 2009 Ford Fusion

P0297 2009 Ford Fusion Code - Vehicle Over-Speed Condition

Quick Answer

Indicates the vehicle has been operated in a manner which caused the vehicle speed to exceed a calibration limit. Common causes include Vehicle driven at a high rate of speed. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0297 2009 Ford Fusion indicates Vehicle Over-Speed Condition.
Common causes
Common causes include Vehicle driven at a high rate of speed.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,120
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 14, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0297 2009 Ford Fusion Description

Indicates the vehicle has been operated in a manner which caused the vehicle speed to exceed a calibration limit. The vehicle speed is continuously monitored and evaluated by the Power Train Control Module (PCM. The DTC is set when the vehicle speed exceed the calibrated limit set within the PCM.
OBDII Code P0297 2009 Ford Fusion - Vehicle Over-Speed Condition - AutoCodes.com
P0297 2009 Ford Fusion Code - Vehicle Over-Speed Condition

What are the Possible Causes of the DTC P0297 2009 Ford Fusion?

  • Vehicle driven at a high rate of speed.

How to Fix the DTC P0297 2009 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0297 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0297 2009 Ford Fusion code?

Need more information on how to fix the P0297 2009 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0297 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0297 2009 Ford Fusion Code

1. What does the OBDII code P0297 mean on a 2009 Ford Fusion?

P0297 indicates "Vehicle Over-Speed Condition," meaning the vehicle's speed exceeded the manufacturer’s preset safety limit.

2. What are the common symptoms of P0297 in a 2009 Ford Fusion?

Symptoms may include the check engine light turning on, a potential reduction in engine performance, or activation of a vehicle speed limiter.

3. What are the possible causes of the P0297 code?

Causes include driving at excessively high speeds, a faulty vehicle speed sensor (VSS), issues with the powertrain control module (PCM), or a miscalibrated speedometer.

4. Can driving habits trigger the P0297 code?

Yes, driving at speeds above the vehicle's designed limit for prolonged periods can trigger this code.

5. How is the P0297 code diagnosed?

A mechanic will use a scan tool to confirm the code, inspect the vehicle speed sensor, check actual driving conditions, and ensure the PCM is functioning correctly.

6. Is it safe to drive a 2009 Ford Fusion with the P0297 code?

While it may be safe in the short term, the code indicates a potential safety concern, so it’s best to address it promptly to avoid further issues.

7. How can the P0297 code be fixed on a 2009 Ford Fusion?

Repairs may include replacing a faulty vehicle speed sensor, recalibrating the speedometer, or reprogramming or replacing the PCM.

8. Can a faulty vehicle speed sensor cause the P0297 code?

Yes, a malfunctioning VSS can send incorrect speed data to the PCM, triggering the code.

9. Does the P0297 code always mean the car was driven too fast?

Not necessarily. It could also be caused by sensor issues, PCM errors, or miscalibration.

10. Will resetting the check engine light clear the P0297 code permanently?

Resetting the light may clear the code temporarily, but the underlying issue must be fixed to prevent it from returning.

Discuss the causes and fixes for P0297 2009 Ford Fusion OBDII Code

Code P0297 2009 Ford Fusion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play