AutoCodes – Ford – P0275 Ford

P0275 Ford Code - Cylinder 5 Injector Contribution/Balance Faul

Quick Answer

Code P0275 is triggered when the Engine Control Module (ECM) detects that the acceleration rate of the crankshaft for Cylinder 5 was less than a calibrated amount. Common causes include Dirty Fuel Injector 5, Faulty Fuel Injector 5, Plugged Fuel Injector 5. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0275 Ford indicates Cylinder 5 Injector Contribution/Balance Faul.
Common causes: Common causes include Dirty Fuel Injector 5, Faulty Fuel Injector 5, Plugged Fuel Injector 5.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 23,773

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 02, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0275 Ford Description

Code P0275 is triggered when the Engine Control Module (ECM) detects that the acceleration rate of the crankshaft for Cylinder 5 was less than a calibrated amount. During normal conditions, the ECM turns the Fuel Injectors ON and OFF in the Fuel Injection System.

OBDII Code P0275 Ford - Cylinder 5 Injector Contribution/Balance Faul - AutoCodes.com — P0275 Ford Code - Cylinder 5 Injector Contribution/Balance Faul

What does this mean?

What are the Possible Causes of the DTC P0275 Ford?

Dirty Fuel Injector 5
Faulty Fuel Injector 5
Plugged Fuel Injector 5
Fuel injector 5 harness is open or shorted
Fuel injector 5 circuit poor electrical connection

How to Fix the DTC P0275 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Clogged or partially clogged fuel injector can cause this code. Start by performing an injector flush before replacing the injector.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0275 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0275 Ford code?

Need more information on how to fix the P0275 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0275 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0275 Ford Code

No Frequently Asked Questions about P0275 Ford Code found.

Discuss the causes and fixes for P0275 Ford OBDII Code

Submit a New Comment

Waldemar
Date: September 12, 2015 at 7:15 pm

Hi I have a Ford F-350 6.0 I change the num 5 injector one week ago and now the truck start to pull on my I put my computer and again the num 5 injectors says Po275 I don't know if I have to change again or what do I have to do

Reply to Comment
OBDIITech
Date: September 12, 2015 at 7:21 pm

It's possible, but check the injector wire first. I had a couple Ford with similar problem and both had broken injector wires.

Reply to Comment