AutoCodesMercury – P0267 Mercury

P0267 Mercury Code - Cylinder 3 Injector Circuit Low

Quick Answer

The Engine Control Module (ECM) supplies voltage to each Fuel Injector on the high control circuits. Common causes include Dirty Fuel Injector 3, Faulty Fuel Injector 3, Plugged Fuel Injector 3. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0267 Mercury indicates Cylinder 3 Injector Circuit Low.
Common causes
Common causes include Dirty Fuel Injector 3, Faulty Fuel Injector 3, Plugged Fuel Injector 3.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 386
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 02, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0267 Mercury Description

The Engine Control Module (ECM) supplies voltage to each Fuel Injector on the high control circuits. The ECM energizes each fuel injector by grounding the low control circuit of the fuel injector. The ECM monitors the status of the fuel injector circuits. When a fuel injector circuit condition is detected by the ECM, the affected fuel injector(s) is disabled. The Diagnostic Trouble Code (DTC) will be set when the ECM detects the fuel injector control circuit is shorted to ground for greater than 2 s.
OBDII Code P0267 Mercury - Cylinder 3 Injector Circuit Low - AutoCodes.com
P0267 Mercury Code - Cylinder 3 Injector Circuit Low

What are the Possible Causes of the DTC P0267 Mercury?

  • Dirty Fuel Injector 3
  • Faulty Fuel Injector 3
  • Plugged Fuel Injector 3
  • Fuel Injector #3 harness is open or shorted
  • Fuel Injector #3 circuit poor electrical connection

How to Fix the DTC P0267 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0267 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0267 Mercury code?

Need more information on how to fix the P0267 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0267 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0267 Mercury Code

1. What does the OBDII code P0267 mean for a Mercury vehicle?

P0267 indicates a problem with the injector circuit for cylinder 3, specifically that the voltage is lower than expected.

2. What are the common symptoms of code P0267 in a Mercury?

Symptoms include rough idling, poor acceleration, reduced fuel efficiency, engine misfires, and possibly an illuminated Check Engine Light.

3. What causes the P0267 code to appear?

Common causes include a faulty fuel injector, damaged wiring or connectors in the injector circuit, a failing Powertrain Control Module (PCM), or corrosion in the circuit.

4. Can I drive my Mercury with a P0267 code?

Driving with this code is not recommended as it can lead to poor performance, increased fuel consumption, and potential engine damage over time.

5. How do I diagnose a P0267 code on my Mercury?

Start by inspecting the injector wiring and connectors for damage or corrosion, test the injector for proper operation, and check the PCM for errors or faults.

6. How do I fix the P0267 code on a Mercury?

Repairs may include replacing the faulty injector, repairing or replacing damaged wiring or connectors, cleaning corroded terminals, or reprogramming/replacing the PCM if necessary.

7. How much does it cost to repair code P0267 on a Mercury?

Repair costs vary, ranging from $150 to $500+ depending on whether the injector, wiring, or PCM needs replacement.

8. Can a dirty fuel injector cause the P0267 code?

Yes, a dirty or clogged fuel injector can restrict fuel flow and trigger this code.

9. Will clearing the P0267 code fix the problem?

Clearing the code will reset the Check Engine Light temporarily, but the underlying issue must be resolved to prevent the code from returning.

10. What tools are needed to troubleshoot a P0267 code?

You’ll need an OBDII scanner, a multimeter for testing electrical connections, and possibly specialized tools to test or replace the fuel injector.

Discuss the causes and fixes for P0267 Mercury OBDII Code

Code P0267 Mercury comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play