AutoCodes – Ford – P0267 2010 Ford Fusion

P0267 2010 Ford Fusion Code - Cylinder 3 Injector Circuit Low

Quick Answer

Code P0267 is triggered when the Engine Control Module (ECM) detects a low voltage in the Fuel Injector 3 Circuit. Common causes include Dirty Fuel Injector 3, Faulty Fuel Injector 3, Plugged Fuel Injector 3. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0267 2010 Ford Fusion indicates Cylinder 3 Injector Circuit Low.
Common causes
Common causes include Dirty Fuel Injector 3, Faulty Fuel Injector 3, Plugged Fuel Injector 3.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,203
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 29, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0267 2010 Ford Fusion Description

Code P0267 is triggered when the Engine Control Module (ECM) detects a low voltage in the Fuel Injector 3 Circuit. During normal conditions, the ECM turns the Fuel Injectors ON and OFF in the Fuel Injection System.
OBDII Code P0267 2010 Ford Fusion - Cylinder 3 Injector Circuit Low - AutoCodes.com
P0267 2010 Ford Fusion Code - Cylinder 3 Injector Circuit Low

What are the Possible Causes of the DTC P0267 2010 Ford Fusion?

  • Dirty Fuel Injector 3
  • Faulty Fuel Injector 3
  • Plugged Fuel Injector 3
  • Fuel Injector #3 harness is open or shorted
  • Fuel Injector #3 circuit poor electrical connection

How to Fix the DTC P0267 2010 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0267 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0267 2010 Ford Fusion code?

Need more information on how to fix the P0267 2010 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0267 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0267 2010 Ford Fusion Code

1. What are the common symptoms of OBDII code P0267 in a 2010 Ford Fusion?

The common symptoms of OBDII code P0267 (Cylinder 3 Injector Circuit Low) in a 2010 Ford Fusion may include rough idling, misfires, loss of power, and an illuminated check engine light.

2. What causes the OBDII code P0267 in a 2010 Ford Fusion?

The OBDII code P0267 in a 2010 Ford Fusion is typically caused by issues like a faulty fuel injector in cylinder 3, wiring problems in the injector circuit, or a problem with the Engine Control Module (ECM).

3. How can I diagnose the OBDII code P0267 in a 2010 Ford Fusion?

Diagnosing the OBDII code P0267 involves using a scan tool to read the code, performing a visual inspection of the injector and its wiring, testing the injector's resistance, and checking for any other related issues in the circuit.

4. What are the possible repair options for OBDII code P0267 in a 2010 Ford Fusion?

Repair options for OBDII code P0267 may include replacing the faulty fuel injector in cylinder 3, repairing or replacing damaged wiring in the injector circuit, or reprogramming the Engine Control Module (ECM) if necessary.

5. Can I drive my 2010 Ford Fusion with OBDII code P0267?

It is not recommended to drive your 2010 Ford Fusion with OBDII code P0267, as it can lead to poor engine performance, increased fuel consumption, and potential damage to the catalytic converter.

6. How much does it cost to fix OBDII code P0267 in a 2010 Ford Fusion?

The cost to fix OBDII code P0267 in a 2010 Ford Fusion can vary depending on the exact cause of the issue, but it may range from a few hundred dollars for a simple repair to over a thousand dollars for more extensive repairs.

7. Can a DIY enthusiast fix OBDII code P0267 in a 2010 Ford Fusion?

While some DIY enthusiasts may be able to diagnose and repair OBDII code P0267 in a 2010 Ford Fusion, it is recommended to seek professional help, especially when dealing with fuel injectors and complex engine components.

8. Will resetting the check engine light resolve OBDII code P0267 in a 2010 Ford Fusion?

Resetting the check engine light will not resolve OBDII code P0267 in a 2010 Ford Fusion, as the underlying issue causing the code needs to be diagnosed and fixed to prevent further engine problems.

9. How often does OBDII code P0267 occur in a 2010 Ford Fusion?

OBDII code P0267 (Cylinder 3 Injector Circuit Low) is a relatively uncommon issue in a 2010 Ford Fusion, but it can occur due to various factors like injector wear, wiring issues, or ECM malfunctions.

10. Is it safe to ignore OBDII code P0267 in a 2010 Ford Fusion?

Ignoring OBDII code P0267 in a 2010 Ford Fusion is not recommended, as it can lead to more severe engine problems over time, affecting performance and potentially causing costly repairs in the future.

Discuss the causes and fixes for P0267 2010 Ford Fusion OBDII Code

Code P0267 2010 Ford Fusion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play