AutoCodes – Ford – P0267 2006 Ford Fusion

P0267 2006 Ford Fusion Code - Cylinder 3 Injector Circuit Low

Quick Answer

Code P0267 is triggered when the Engine Control Module (ECM) detects a low voltage in the Fuel Injector 3 Circuit. Common causes include Dirty Fuel Injector 3, Faulty Fuel Injector 3, Plugged Fuel Injector 3. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0267 2006 Ford Fusion indicates Cylinder 3 Injector Circuit Low.
Common causes: Common causes include Dirty Fuel Injector 3, Faulty Fuel Injector 3, Plugged Fuel Injector 3.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,821

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 29, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0267 2006 Ford Fusion Description

Code P0267 is triggered when the Engine Control Module (ECM) detects a low voltage in the Fuel Injector 3 Circuit. During normal conditions, the ECM turns the Fuel Injectors ON and OFF in the Fuel Injection System.

OBDII Code P0267 2006 Ford Fusion - Cylinder 3 Injector Circuit Low - AutoCodes.com — P0267 2006 Ford Fusion Code - Cylinder 3 Injector Circuit Low

What does this mean?

What are the Possible Causes of the DTC P0267 2006 Ford Fusion?

Dirty Fuel Injector 3
Faulty Fuel Injector 3
Plugged Fuel Injector 3
Fuel Injector #3 harness is open or shorted
Fuel Injector #3 circuit poor electrical connection

How to Fix the DTC P0267 2006 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Clogged or partially clogged fuel injector can cause this code. Start by performing an injector flush before replacing the injector.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0267 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0267 2006 Ford Fusion code?

Need more information on how to fix the P0267 2006 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0267 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0267 2006 Ford Fusion Code

1. What does the OBDII code P0267 mean for a 2006 Ford Fusion?

P0267 indicates a "Cylinder 3 Injector Circuit Low," meaning the power or signal to the fuel injector in cylinder 3 is below the expected range.

2. What are the common symptoms of code P0267 in a 2006 Ford Fusion?

Symptoms may include rough idling, misfires, reduced fuel efficiency, lack of power, and an illuminated check engine light.

3. What causes the P0267 code in a 2006 Ford Fusion?

Common causes include a faulty fuel injector, damaged wiring or connectors in the injector circuit, a malfunctioning injector driver in the PCM, or corrosion in the electrical connections.

4. Can you drive with the P0267 code active in a 2006 Ford Fusion?

Driving with this code is not recommended, as it can lead to poor performance, increased emissions, and potential damage to the engine or catalytic converter.

5. How do you diagnose the P0267 code on a 2006 Ford Fusion?

Diagnosis involves inspecting the cylinder 3 injector wiring and connectors for damage, testing the injector for proper resistance, and checking the injector driver circuit in the PCM.

6. What tools are needed to troubleshoot the P0267 code?

Youâ€™ll need an OBDII scanner, a multimeter, and possibly a noid light to test the injector circuit.

7. How can you fix the P0267 code on a 2006 Ford Fusion?

Repairs may include replacing the cylinder 3 fuel injector, repairing or replacing damaged wiring or connectors, or reprogramming/replacing the PCM if itâ€™s faulty.

8. How much does it cost to repair the P0267 code in a 2006 Ford Fusion?

The repair cost depends on the issue but typically ranges from $150 to $500, with injector replacement being on the higher end.

9. Can a clogged fuel injector cause the P0267 code?

No, a clogged injector typically does not cause this code. P0267 specifically refers to an electrical issue in the injector circuit, not a mechanical blockage.

10. Will clearing the P0267 code fix the problem?

Clearing the code without addressing the underlying cause will not fix the issue, and the code will likely return. Proper diagnosis and repair are required.