AutoCodesMercury – P0265 Mercury

P0265 Mercury Code - Cylinder 2 Injector Circuit High

Quick Answer

The Engine Control Module (ECM) supplies voltage to each Fuel Injector on the high control circuits. Common causes include Dirty Fuel Injector 2, Faulty Fuel Injector 2, Plugged Fuel Injector 2. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0265 Mercury indicates Cylinder 2 Injector Circuit High.
Common causes
Common causes include Dirty Fuel Injector 2, Faulty Fuel Injector 2, Plugged Fuel Injector 2.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 328
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 02, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0265 Mercury Description

The Engine Control Module (ECM) supplies voltage to each Fuel Injector on the high control circuits. The ECM energizes each fuel injector by grounding the low control circuit of the fuel injector. The ECM monitors the status of the fuel injector circuits. When a fuel injector circuit condition is detected by the ECM, the affected fuel injector(s) is disabled. The Diagnostic Trouble Code (DTC) will be set when the ECM detects the fuel injector control circuit is shorted to voltage for greater than 2 s.
OBDII Code P0265 Mercury - Cylinder 2 Injector Circuit High - AutoCodes.com
P0265 Mercury Code - Cylinder 2 Injector Circuit High

What are the Possible Causes of the DTC P0265 Mercury?

  • Dirty Fuel Injector 2
  • Faulty Fuel Injector 2
  • Plugged Fuel Injector 2
  • Fuel Injector #2 harness is open or shorted
  • Fuel Injector #2 circuit poor electrical connection

How to Fix the DTC P0265 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0265 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0265 Mercury code?

Need more information on how to fix the P0265 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0265 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0265 Mercury Code

1. What does the OBDII code P0265 mean on a Mercury?

P0265 indicates that the fuel injector circuit for cylinder 2 has a high voltage condition, often caused by wiring or injector issues.

2. What are the common symptoms of code P0265 on a Mercury?

Symptoms may include rough engine idle, poor fuel efficiency, misfires, decreased engine performance, and the check engine light being illuminated.

3. What causes the P0265 code on a Mercury?

Common causes include a shorted fuel injector, damaged wiring or connectors to the injector, a faulty PCM (Powertrain Control Module), or a corroded electrical connection.

4. How do I diagnose the P0265 code on a Mercury?

Start by inspecting the wiring and connectors for cylinder 2’s fuel injector, then test the injector itself for proper resistance and operation. Use a multimeter or scan tool for further diagnostics.

5. Can I drive my Mercury with the P0265 code active?

Driving with this code is not recommended, as it could lead to engine damage, poor performance, or unsafe driving conditions.

6. How do I fix the P0265 code on a Mercury?

Repairs may include replacing the cylinder 2 injector, repairing or replacing damaged wiring, cleaning corroded electrical connections, or replacing the PCM if necessary.

7. How much does it cost to repair the P0265 code on a Mercury?

Repair costs vary but may range from $150 to $500 depending on whether the issue is with the injector, wiring, or another component.

8. Can a bad fuel injector cause the P0265 code on a Mercury?

Yes, a shorted or faulty fuel injector for cylinder 2 is a common cause of this code.

9. Could a bad PCM trigger the P0265 code on a Mercury?

While rare, a malfunctioning PCM could cause the code if it fails to regulate the injector circuit voltage properly.

10. What tools are needed to troubleshoot the P0265 code on a Mercury?

Basic tools include a scan tool, multimeter, and potentially an injector tester for more detailed diagnostics.

Discuss the causes and fixes for P0265 Mercury OBDII Code

Code P0265 Mercury comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play