P0264 Hyundai Code - Cylinder 2 Injector Circuit Low
Quick Answer
Code P0264 is triggered when the Engine Control Module (ECM) detects a low voltage in the Fuel Injector 2 Circuit. Common causes include Dirty Fuel Injector 2, Faulty Fuel Injector 2, Plugged Fuel Injector 2. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0264 Hyundai indicates Cylinder 2 Injector Circuit Low.
- Common causes
- Common causes include Dirty Fuel Injector 2, Faulty Fuel Injector 2, Plugged Fuel Injector 2.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0264 Hyundai Description
What are the Possible Causes of the DTC P0264 Hyundai?
- Dirty Fuel Injector 2
- Faulty Fuel Injector 2
- Plugged Fuel Injector 2
- Fuel Injector #2 harness is open or shorted
- Fuel Injector #2 circuit poor electrical connection
How to Fix the DTC P0264 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0264 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0264 Hyundai code?
Need more information on how to fix the P0264 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0264 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0264 Hyundai Code
1. What does the OBDII code P0264 mean on a Hyundai?
P0264 indicates a "Cylinder 2 Injector Circuit Low" fault, meaning the fuel injector circuit for cylinder 2 is experiencing lower-than-expected voltage or resistance.
2. What are the symptoms of code P0264 in a Hyundai?
Common symptoms include rough idling, misfires, reduced engine performance, poor fuel economy, and an illuminated check engine light.
3. What causes the P0264 code on a Hyundai?
Potential causes include a faulty fuel injector, damaged or corroded wiring or connectors, a malfunctioning injector driver in the PCM, or a short circuit in the injector circuit.
4. Can I drive my Hyundai with a P0264 code?
Driving with a P0264 code is not recommended, as it can lead to engine misfires, reduced performance, and potential damage to the catalytic converter.
5. How do I diagnose the P0264 code in my Hyundai?
Start by inspecting the wiring and connectors for cylinder 2's injector for damage or corrosion. Use a multimeter to check for proper voltage and resistance. If the wiring is fine, test the injector and PCM.
6. How do I fix the P0264 code on my Hyundai?
Repairs may include replacing the faulty injector, repairing or replacing damaged wiring or connectors, or replacing the PCM if it’s determined to be the root cause.
7. How much does it cost to fix code P0264 in a Hyundai?
Repair costs vary, but replacing a fuel injector typically costs $150-$300 (parts and labor), while wiring repairs or PCM replacement can be more expensive depending on the issue.
8. Can a dirty fuel injector cause the P0264 code in a Hyundai?
A dirty injector may not directly cause the P0264 code, but it can contribute to poor performance. However, the code specifically points to an electrical issue with the injector circuit.
9. Will clearing the P0264 code fix the problem in my Hyundai?
Clearing the code will turn off the check engine light temporarily, but the issue will likely reappear unless the underlying problem is resolved.
10. What tools do I need to troubleshoot the P0264 code on my Hyundai?
You’ll need an OBDII scanner, a multimeter to check voltage and resistance, and wiring diagrams for your Hyundai model to trace the injector circuit.
Discuss the causes and fixes for P0264 Hyundai OBDII Code
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
