P0264 2006 Ford Fusion Code - Cylinder 2 Injector Circuit Low
Quick Answer
Code P0264 is triggered when the Engine Control Module (ECM) detects a low voltage in the Fuel Injector 2 Circuit. Common causes include Dirty Fuel Injector 2, Faulty Fuel Injector 2, Plugged Fuel Injector 2. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0264 2006 Ford Fusion indicates Cylinder 2 Injector Circuit Low.
- Common causes
- Common causes include Dirty Fuel Injector 2, Faulty Fuel Injector 2, Plugged Fuel Injector 2.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0264 2006 Ford Fusion Description
What are the Possible Causes of the DTC P0264 2006 Ford Fusion?
- Dirty Fuel Injector 2
- Faulty Fuel Injector 2
- Plugged Fuel Injector 2
- Fuel Injector #2 harness is open or shorted
- Fuel Injector #2 circuit poor electrical connection
How to Fix the DTC P0264 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0264 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0264 2006 Ford Fusion code?
Need more information on how to fix the P0264 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0264 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0264 2006 Ford Fusion Code
1. What does the OBDII code P0264 mean on a 2006 Ford Fusion?
P0264 indicates that there is a low voltage condition in the cylinder 2 fuel injector circuit, which may result in improper fuel delivery.
2. What are the common symptoms of code P0264 in a 2006 Ford Fusion?
Symptoms may include rough idling, poor acceleration, engine misfires, reduced fuel efficiency, and the Check Engine Light illuminating.
3. What causes the P0264 code to appear on a 2006 Ford Fusion?
Common causes include a faulty fuel injector, damaged or corroded wiring in the injector circuit, a bad injector driver in the PCM, or a loose electrical connection.
4. Can I drive my 2006 Ford Fusion with a P0264 code?
It’s not recommended to drive for an extended period with this code, as it can lead to poor engine performance and potentially damage other components.
5. How can I diagnose the P0264 code on my 2006 Ford Fusion?
Start by inspecting the wiring and connectors for cylinder 2’s injector, test the injector with a multimeter, and use a scan tool to monitor injector pulse and voltage.
6. How do I fix the P0264 code on a 2006 Ford Fusion?
Repairs may include replacing the cylinder 2 fuel injector, repairing or replacing damaged wiring, cleaning corroded connectors, or, in some cases, replacing the PCM.
7. How much does it cost to fix the P0264 code on a 2006 Ford Fusion?
Repair costs vary but typically range from $100 to $300, depending on whether the issue is with the injector, wiring, or PCM.
8. Will cleaning the fuel injector fix the P0264 code on a 2006 Ford Fusion?
In some cases, cleaning a clogged or dirty injector may resolve the issue, but if the injector is faulty or the wiring is damaged, cleaning alone won’t fix it.
9. Can a bad PCM cause the P0264 code on a 2006 Ford Fusion?
Yes, a malfunctioning PCM can fail to properly signal the injector circuit, leading to a P0264 code, though this is less common than wiring or injector issues.
10. What tools are needed to troubleshoot the P0264 code on a 2006 Ford Fusion?
You’ll need a scan tool or OBDII scanner, a multimeter to test electrical continuity, and possibly a noid light to check injector pulse.
Discuss the causes and fixes for P0264 2006 Ford Fusion OBDII Code
Code P0264 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
