AutoCodes – Cadillac – P0230 Cadillac

P0230 Cadillac Code - Fuel Pump Relay Control Circuit

Quick Answer

When you turn the ignition switch to the ON position, the Powertrain Control Module (PCM) activates the in-tank fuel pump. Common causes include Faulty Fuel Pump Relay, Fuel Pump Relay harness is open or shorted, Fuel Pump Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0230 Cadillac indicates Fuel Pump Relay Control Circuit.
Common causes: Common causes include Faulty Fuel Pump Relay, Fuel Pump Relay harness is open or shorted, Fuel Pump Relay circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,766

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0230 Cadillac Description

When you turn the ignition switch to the ON position, the Powertrain Control Module (PCM) activates the in-tank fuel pump. The fuel pump remains on as long as the PCM receives reference pulses from the electronic ignition system. If there are no reference pulses, the PCM turns the fuel pump off after about 2-3 seconds. The PCM controls the fuel pump relay by applying B+ to the control circuit via an internal switch called a driver. The primary function of the driver is to supply a voltage to the fuel pump relay. The driver has a fault line which the PCM monitors. When the PCM commands the fuel pump on, the voltage of the control circuit should be high (near battery voltage). When the PCM commands the control circuit to the fuel pump OFF, the voltage potential of the circuit should be low (near 0 volts). This DTC sets when the PCM detects the fuel pump control circuit is shorted to ground.

OBDII Code P0230 Cadillac - Fuel Pump Relay Control Circuit - AutoCodes.com — P0230 Cadillac Code - Fuel Pump Relay Control Circuit

What does this mean?

What are the Possible Causes of the DTC P0230 Cadillac?

Faulty Fuel Pump Relay
Fuel Pump Relay harness is open or shorted
Fuel Pump Relay circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0230 Cadillac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0230 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0230 Cadillac code?

Need more information on how to fix the P0230 Cadillac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0230 Cadillac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.