AutoCodes – Ford – P0230 2006 Ford Fusion

P0230 2006 Ford Fusion Code - The ECM Has Detected A Fault In The Fuel Pump Circuit

Quick Answer

The Powertrain Control Module (PCM) monitors the fuel pump (FP) circuit output from the PCM. Common causes include Blown Fuel Pump fuse, Open Fuel Pump Monitor Circuit, Faulty Fuel Pump Relay. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0230 2006 Ford Fusion indicates The ECM Has Detected A Fault In The Fuel Pump Circuit.
Common causes: Common causes include Blown Fuel Pump fuse, Open Fuel Pump Monitor Circuit, Faulty Fuel Pump Relay.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,993

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0230 2006 Ford Fusion Description

The Powertrain Control Module (PCM) monitors the fuel pump (FP) circuit output from the PCM. The test fails when the FP output is commanded ON (grounded) and excessive current draw is detected on the FP circuit. The test also fails when the FP output is commanded OFF and voltage is not detected on the FP circuit. The PCM expects to detect VPWR voltage coming through the fuel pump relay coil to the FP circuit

OBDII Code P0230 2006 Ford Fusion - The ECM Has Detected A Fault In The Fuel Pump Circuit - AutoCodes.com — P0230 2006 Ford Fusion Code - The ECM Has Detected A Fault In The Fuel Pump Circuit

What does this mean?

What are the Possible Causes of the DTC P0230 2006 Ford Fusion?

Blown Fuel Pump fuse
Open Fuel Pump Monitor Circuit
Faulty Fuel Pump Relay
Damaged ECM

How to Fix the DTC P0230 2006 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

For some FORD models:
1. Disconnect the inertia switch harness connector
2. Turn key to ON position (Engine OFF)
3. Measure voltage of circuit between inertia switch harness connector and ground
4. If battery voltage is found, replaced Inertia Switch
5. Clear codes.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0230 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0230 2006 Ford Fusion code?

Need more information on how to fix the P0230 2006 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0230 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0230 2006 Ford Fusion Code

1. What does OBDII code P0230 mean on a 2006 Ford Fusion?

Code P0230 indicates that the ECM (Engine Control Module) has detected a fault in the fuel pump primary circuit, which may affect fuel delivery to the engine.

2. What are the common symptoms of code P0230 in a 2006 Ford Fusion?

Symptoms may include the engine failing to start, stalling, poor acceleration, or the check engine light being illuminated.

3. What causes the P0230 code to appear on a 2006 Ford Fusion?

Common causes include a faulty fuel pump relay, damaged wiring or connectors in the fuel pump circuit, a failing fuel pump, or an issue with the ECM itself.

4. Can I drive my 2006 Ford Fusion with the P0230 code?

Driving with this code is not recommended, as it can cause the engine to stall unexpectedly or fail to start, potentially leaving you stranded.

5. How can I diagnose the P0230 code on a 2006 Ford Fusion?

Start by checking the fuel pump relay and fuse, inspecting wiring and connectors for damage, and testing the fuel pump for proper operation. A scan tool can help verify fuel system pressure and related data.

6. How do I fix the P0230 code on a 2006 Ford Fusion?

Repairs may include replacing the fuel pump relay, repairing or replacing damaged wiring or connectors, or replacing the fuel pump if itâ€™s faulty.

7. How much does it cost to fix the P0230 code on a 2006 Ford Fusion?

Repair costs vary depending on the issue. Replacing a fuel pump relay or repairing wiring may cost around $50-$150, while replacing the fuel pump can range from $300-$800.

8. Can a bad fuel pump cause the P0230 code?

Yes, a failing fuel pump can trigger the P0230 code if it causes an electrical fault in the fuel pump circuit.

9. Will clearing the P0230 code fix the problem?

Clearing the code will turn off the check engine light temporarily but wonâ€™t resolve the underlying issue. Proper diagnosis and repairs are necessary.

10. What tools are needed to diagnose the P0230 code?

Youâ€™ll need a scan tool to read and clear codes, a multimeter to test electrical connections, and possibly a fuel pressure gauge to check the fuel pumpâ€™s performance.