P0227 Ford Code - Throttle/Pedal Position Sensor/Switch 'C' Circuit Low Input
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Faulty Throttle Position Sensor (TPS), Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0227 Ford indicates Throttle/Pedal Position Sensor/Switch 'C' Circuit Low Input.
- Common causes
- Common causes include Faulty Throttle Position Sensor (TPS), Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0227 Ford Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P0227 Ford?
- Faulty Throttle Position Sensor (TPS)
- Throttle Position Sensor (TPS) harness is open or shorted
- Throttle Position Sensor (TPS) circuit poor electrical connection
How to Fix the DTC P0227 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0227 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0227 Ford code?
Need more information on how to fix the P0227 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0227 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0227 Ford Code
No Frequently Asked Questions about P0227 Ford Code found.
Discuss the causes and fixes for P0227 Ford OBDII Code
Code P0227 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.