AutoCodes – Nissan – P0223 2010 Nissan Rogue

P0223 2010 Nissan Rogue Code - Throttle Position Sensor 1 Circuit High Input

Quick Answer

Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0223 2010 Nissan Rogue indicates Throttle Position Sensor 1 Circuit High Input.
Common causes: Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,163

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0223 2010 Nissan Rogue Description

Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. The throttle position sensor responds to the throttle valve movement.
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.

OBDII Code P0223 2010 Nissan Rogue - Throttle Position Sensor 1 Circuit High Input - AutoCodes.com — P0223 2010 Nissan Rogue Code - Throttle Position Sensor 1 Circuit High Input

What does this mean?

What are the Possible Causes of the DTC P0223 2010 Nissan Rogue?

Faulty Throttle position sensor
Throttle position sensor harness is open or shorted
Throttle position sensor poor electrical connection
Faulty accelerator pedal position sensor

How to Fix the DTC P0223 2010 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The throttle position sensor (TPS) is built into the throttle body.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0223 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0223 2010 Nissan Rogue code?

Need more information on how to fix the P0223 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0223 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0223 2010 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0223 on a 2010 Nissan Rogue?

The common symptoms of OBDII code P0223 (Throttle Position Sensor 1 Circuit High Input) on a 2010 Nissan Rogue may include issues like reduced engine power, erratic throttle response, and potential stalling.

2. What causes the Throttle Position Sensor 1 Circuit High Input code (P0223) on a 2010 Nissan Rogue?

The P0223 code on a 2010 Nissan Rogue is typically triggered by a faulty throttle position sensor, damaged wiring or connectors related to the sensor, or issues with the throttle control system.

3. How can I diagnose the Throttle Position Sensor issue causing code P0223 on my 2010 Nissan Rogue?

To diagnose the throttle position sensor issue causing code P0223, you can use a scan tool to check for the code, visually inspect the sensor and related wiring, perform a throttle position sensor test, and check for any other underlying issues in the throttle system.

4. Can a dirty throttle body cause the P0223 code on a 2010 Nissan Rogue?

Yes, a dirty throttle body can sometimes cause the P0223 code to trigger on a 2010 Nissan Rogue as it can affect the proper functioning of the throttle position sensor and the overall throttle control system.

5. What are the repair options for fixing OBDII code P0223 on a 2010 Nissan Rogue?

Repair options for fixing code P0223 on a 2010 Nissan Rogue include replacing the throttle position sensor, repairing or replacing damaged wiring/connectors, cleaning the throttle body, and ensuring proper calibration of the throttle system.

6. Is it safe to continue driving my 2010 Nissan Rogue with OBDII code P0223 active?

It is not recommended to continue driving your 2010 Nissan Rogue with the P0223 code active, as it can lead to performance issues, potential stalling, and further damage to the throttle control system.

7. Can a DIY enthusiast fix the Throttle Position Sensor 1 Circuit High Input issue (P0223) on a 2010 Nissan Rogue?

While some DIY enthusiasts may attempt to fix the P0223 code themselves by replacing the throttle position sensor or cleaning the throttle body, it is recommended to have the repair done by a professional mechanic for proper diagnosis and fix.

8. How long does it typically take to repair the Throttle Position Sensor issue causing code P0223 on a 2010 Nissan Rogue?

The repair time for fixing the Throttle Position Sensor issue causing code P0223 on a 2010 Nissan Rogue can vary depending on the exact cause and the complexity of the repair, but it may take a few hours to complete.

9. Will resetting the OBDII code P0223 on my 2010 Nissan Rogue make it go away permanently?

Simply resetting the P0223 code on your 2010 Nissan Rogue may temporarily make it disappear, but if the underlying issue with the throttle position sensor or the throttle control system is not fixed, the code is likely to reappear.

10. Are there any recalls or technical service bulletins related to the Throttle Position Sensor 1 Circuit High Input code (P0223) on a 2010 Nissan Rogue?

It is advisable to check with Nissan dealerships or visit the National Highway Traffic Safety Administration (NHTSA) website to see if there are any recalls or technical service bulletins related to the P0223 code on a 2010 Nissan Rogue.