P0223 2009 Nissan Rogue Code - Throttle Position Sensor 1 Circuit High Input
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0223 2009 Nissan Rogue indicates Throttle Position Sensor 1 Circuit High Input.
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0223 2009 Nissan Rogue Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P0223 2009 Nissan Rogue?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
- Faulty accelerator pedal position sensor
How to Fix the DTC P0223 2009 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0223 2009 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0223 2009 Nissan Rogue code?
Need more information on how to fix the P0223 2009 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0223 2009 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0223 2009 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0223 in a 2009 Nissan Rogue?
The common symptoms of code P0223 in a 2009 Nissan Rogue include issues with the vehicle's acceleration, reduced engine power, and the illumination of the Check Engine Light.
2. What does the OBDII code P0223 indicate in a 2009 Nissan Rogue?
OBDII code P0223 in a 2009 Nissan Rogue indicates a Throttle Position Sensor 1 Circuit High Input issue, meaning that the signal sent by the throttle position sensor is higher than expected.
3. What are the potential causes of the Throttle Position Sensor 1 Circuit High Input code P0223 in a 2009 Nissan Rogue?
Common causes of code P0223 in a 2009 Nissan Rogue include a faulty throttle position sensor, damaged wiring or connectors in the throttle position sensor circuit, or issues with the engine control module (ECM).
4. How can I diagnose the OBDII code P0223 in my 2009 Nissan Rogue?
To diagnose code P0223 in a 2009 Nissan Rogue, you can use an OBDII scanner to retrieve the code and then inspect the throttle position sensor, wiring, and connectors for any visible damage or issues.
5. Can I continue driving my 2009 Nissan Rogue with OBDII code P0223?
It is not recommended to continue driving your 2009 Nissan Rogue with code P0223, as it can lead to further damage to the engine and other components. It is best to address the issue promptly.
6. How can I repair the Throttle Position Sensor 1 Circuit High Input code P0223 in my 2009 Nissan Rogue?
Repairing code P0223 in a 2009 Nissan Rogue may involve replacing the throttle position sensor, repairing or replacing damaged wiring or connectors, or reprogramming the engine control module (ECM).
7. Is it possible to reset the OBDII code P0223 in a 2009 Nissan Rogue without fixing the underlying issue?
Resetting the OBDII code P0223 without addressing the underlying issue will only temporarily turn off the Check Engine Light. The code will likely reappear until the root cause is fixed.
8. How much does it cost to repair the Throttle Position Sensor 1 Circuit High Input code P0223 in a 2009 Nissan Rogue?
The cost of repairing code P0223 in a 2009 Nissan Rogue can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast fix the OBDII code P0223 in a 2009 Nissan Rogue?
A DIY enthusiast with the necessary tools and knowledge may be able to fix code P0223 in a 2009 Nissan Rogue by replacing the throttle position sensor or repairing damaged wiring, but professional assistance is recommended for accurate diagnosis.
10. How long does it take to repair the Throttle Position Sensor 1 Circuit High Input code P0223 in a 2009 Nissan Rogue?
The time required to repair code P0223 in a 2009 Nissan Rogue can vary based on the exact cause of the issue and the repair process involved. Typically, it may take a few hours to a full day for diagnosis and repair.
Discuss the causes and fixes for P0223 2009 Nissan Rogue OBDII Code
Code P0223 2009 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
