P0223 2008 Nissan Rogue Code - Throttle Position Sensor 1 Circuit High Input
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0223 2008 Nissan Rogue indicates Throttle Position Sensor 1 Circuit High Input.
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0223 2008 Nissan Rogue Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P0223 2008 Nissan Rogue?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
- Faulty accelerator pedal position sensor
How to Fix the DTC P0223 2008 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0223 2008 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0223 2008 Nissan Rogue code?
Need more information on how to fix the P0223 2008 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0223 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0223 2008 Nissan Rogue Code
1. What does the OBDII code P0223 mean on a 2008 Nissan Rogue?
The code P0223 on a 2008 Nissan Rogue indicates a Throttle Position Sensor 1 Circuit High Input error.
2. What are the common symptoms of a P0223 code in a 2008 Nissan Rogue?
Common symptoms of a P0223 code in a 2008 Nissan Rogue include poor acceleration, stalling, rough idling, and the vehicle going into "limp mode."
3. What can cause the P0223 code to trigger in a 2008 Nissan Rogue?
The P0223 code in a 2008 Nissan Rogue can be triggered by a faulty throttle position sensor, damaged wiring or connectors, or issues with the engine control module.
4. How can I diagnose the P0223 code on my 2008 Nissan Rogue?
Diagnosing the P0223 code on a 2008 Nissan Rogue involves checking the throttle position sensor and its wiring for any visible damage, as well as using a multimeter to test for proper voltage signals.
5. What are the repair options for a P0223 code on a 2008 Nissan Rogue?
Repair options for a P0223 code on a 2008 Nissan Rogue include replacing the throttle position sensor, repairing any damaged wiring or connectors, or reprogramming the engine control module.
6. Can I drive my 2008 Nissan Rogue with a P0223 code?
It is not recommended to drive a 2008 Nissan Rogue with a P0223 code, as it can lead to poor performance and potential safety hazards. It is best to address the issue promptly.
7. How much does it cost to fix a P0223 code on a 2008 Nissan Rogue?
The cost to fix a P0223 code on a 2008 Nissan Rogue can vary depending on the underlying issue, but it typically ranges from $100 to $300 for parts and labor.
8. Will resetting the OBDII system clear the P0223 code on a 2008 Nissan Rogue?
Resetting the OBDII system may temporarily clear the P0223 code on a 2008 Nissan Rogue, but if the underlying issue is not addressed, the code is likely to reappear.
9. Can a DIY enthusiast fix a P0223 code on a 2008 Nissan Rogue?
DIY enthusiasts with automotive repair experience may be able to fix a P0223 code on a 2008 Nissan Rogue by following repair guides and using the necessary tools and equipment.
10. How often does the P0223 code occur in a 2008 Nissan Rogue?
The P0223 code in a 2008 Nissan Rogue can occur sporadically due to various factors, such as sensor wear, electrical issues, or environmental conditions affecting the vehicle.
Discuss the causes and fixes for P0223 2008 Nissan Rogue OBDII Code
Code P0223 2008 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
