P0223 2004 Nissan Maxima Code - Throttle Position Sensor/Switch 2 Circuit High Input
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0223 2004 Nissan Maxima indicates Throttle Position Sensor/Switch 2 Circuit High Input.
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0223 2004 Nissan Maxima Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P0223 2004 Nissan Maxima?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
- Faulty accelerator pedal position sensor
How to Fix the DTC P0223 2004 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0223 2004 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0223 2004 Nissan Maxima code?
Need more information on how to fix the P0223 2004 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0223 2004 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0223 2004 Nissan Maxima Code
1. What are the common symptoms of OBDII code P0223 in a 2004 Nissan Maxima?
The common symptoms include rough idling, stalling, decreased fuel efficiency, and issues with acceleration.
2. What does the OBDII code P0223 on a 2004 Nissan Maxima indicate?
OBDII code P0223 indicates a problem with the Throttle Position Sensor/Switch 2 Circuit High Input.
3. What are the possible causes of OBDII code P0223 on a 2004 Nissan Maxima?
Possible causes include a faulty throttle position sensor, damaged wiring or connectors, or issues with the throttle body itself.
4. How can I diagnose the Throttle Position Sensor/Switch 2 Circuit High Input issue in a 2004 Nissan Maxima?
You can use a diagnostic scanner to read the trouble codes, inspect the throttle position sensor and its wiring, and perform voltage tests to pinpoint the problem.
5. Can I still drive my 2004 Nissan Maxima with OBDII code P0223?
It is not recommended to drive your vehicle with this code, as it can lead to further damage and potentially unsafe driving conditions.
6. How can I repair OBDII code P0223 on my 2004 Nissan Maxima?
Repair options include replacing the throttle position sensor, repairing damaged wiring or connectors, or cleaning and inspecting the throttle body.
7. Is it possible to reset the OBDII code P0223 in a 2004 Nissan Maxima?
You can try resetting the code by using an OBDII scanner to clear the trouble codes after addressing the underlying issue.
8. How much does it typically cost to fix OBDII code P0223 on a 2004 Nissan Maxima?
The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast fix OBDII code P0223 on a 2004 Nissan Maxima?
If you have the necessary tools and experience working on cars, you may be able to address the issue yourself by following repair guides and tutorials.
10. How often does the Throttle Position Sensor/Switch 2 Circuit High Input issue occur in 2004 Nissan Maximas?
While it is not extremely common, this issue can occur due to normal wear and tear on the throttle components over time. Regular maintenance can help prevent such problems.
Discuss the causes and fixes for P0223 2004 Nissan Maxima OBDII Code
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
