P0223 2004 Nissan Altima Sedan Code - Throttle Position Sensor/Switch 2 Circuit High Input
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0223 2004 Nissan Altima Sedan indicates Throttle Position Sensor/Switch 2 Circuit High Input.
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0223 2004 Nissan Altima Sedan Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P0223 2004 Nissan Altima Sedan?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
- Faulty accelerator pedal position sensor
How to Fix the DTC P0223 2004 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0223 2004 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0223 2004 Nissan Altima Sedan code?
Need more information on how to fix the P0223 2004 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0223 2004 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0223 2004 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0223 in a 2004 Nissan Altima Sedan?
The common symptoms include reduced engine power, hesitation or stalling during acceleration, and the vehicle going into "limp mode."
2. What does the OBDII code P0223 indicate in a 2004 Nissan Altima Sedan?
The code P0223 indicates a Throttle Position Sensor/Switch 2 Circuit High Input issue in the vehicle.
3. What are the possible causes of OBDII code P0223 in a 2004 Nissan Altima Sedan?
Possible causes include a faulty throttle position sensor, damaged wiring or connectors in the throttle position sensor circuit, or a problem with the engine control module.
4. How can I diagnose the OBDII code P0223 in my 2004 Nissan Altima Sedan?
You can diagnose the code by using an OBDII scanner to retrieve the code, visually inspecting the throttle position sensor and its wiring, and performing a voltage test on the sensor.
5. Can I drive my 2004 Nissan Altima Sedan with OBDII code P0223?
It is not recommended to drive the vehicle with code P0223 as it can lead to poor engine performance and potential safety hazards.
6. How can I repair OBDII code P0223 in my 2004 Nissan Altima Sedan?
The repair typically involves replacing the throttle position sensor, repairing or replacing any damaged wiring or connectors, and clearing the code with an OBDII scanner.
7. Will resetting the OBDII code P0223 in my 2004 Nissan Altima Sedan fix the issue?
Simply resetting the code may temporarily clear the warning light, but it will not fix the underlying problem causing the code to appear.
8. Is it safe to continue driving my 2004 Nissan Altima Sedan if the throttle position sensor is faulty?
Driving with a faulty throttle position sensor can lead to erratic engine behavior and potentially unsafe driving conditions. It is best to address the issue promptly.
9. Can a DIY enthusiast replace the throttle position sensor to fix OBDII code P0223 in a 2004 Nissan Altima Sedan?
Yes, replacing the throttle position sensor can be a relatively straightforward DIY repair for those with some mechanical experience and the necessary tools.
10. How can I prevent OBDII code P0223 from appearing in my 2004 Nissan Altima Sedan in the future?
Regularly inspecting and maintaining the throttle position sensor, ensuring proper wiring connections, and addressing any engine performance issues promptly can help prevent the recurrence of code P0223.
Discuss the causes and fixes for P0223 2004 Nissan Altima Sedan OBDII Code
Code P0223 2004 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
