AutoCodes – Nissan – P0222 2012 Nissan Rogue

P0222 2012 Nissan Rogue Code - Throttle Position Sensor 1 Circuit Low Input

Quick Answer

Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0222 2012 Nissan Rogue indicates Throttle Position Sensor 1 Circuit Low Input.
Common causes: Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,838

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0222 2012 Nissan Rogue Description

Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. The throttle position sensor responds to the throttle valve movement.
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.

OBDII Code P0222 2012 Nissan Rogue - Throttle Position Sensor 1 Circuit Low Input - AutoCodes.com — P0222 2012 Nissan Rogue Code - Throttle Position Sensor 1 Circuit Low Input

What does this mean?

What are the Possible Causes of the DTC P0222 2012 Nissan Rogue?

Faulty Throttle position sensor
Throttle position sensor harness is open or shorted
Throttle position sensor poor electrical connection
Faulty accelerator pedal position sensor

How to Fix the DTC P0222 2012 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The throttle position sensor (TPS) is built into the throttle body.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0222 2012 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0222 2012 Nissan Rogue code?

Need more information on how to fix the P0222 2012 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0222 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0222 2012 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0222 in a 2012 Nissan Rogue?

- Common symptoms include reduced engine power, poor acceleration, stalling, and the vehicle going into "limp mode."

2. What does the OBDII code P0222 for a 2012 Nissan Rogue indicate?

- P0222 indicates a Throttle Position Sensor 1 Circuit Low Input error in the vehicle's system.

3. What are the possible causes of the Throttle Position Sensor 1 Circuit Low Input error in a 2012 Nissan Rogue?

- Possible causes include a faulty throttle position sensor, damaged wiring or connectors, or issues with the engine control module (ECM).

4. How can I diagnose the OBDII code P0222 in my 2012 Nissan Rogue?

- Use a diagnostic scanner to retrieve the code, inspect the throttle position sensor and its wiring for damage, and test the sensor's voltage output.

5. Can I drive my 2012 Nissan Rogue with the OBDII code P0222 present?

- It is not recommended to drive with this code as it can lead to performance issues and potential safety hazards.

6. How can I repair the Throttle Position Sensor 1 Circuit Low Input error in a 2012 Nissan Rogue?

- Repair options include replacing the throttle position sensor, repairing damaged wiring, or reprogramming the ECM if necessary.

7. Are there any DIY tips for fixing OBDII code P0222 in a 2012 Nissan Rogue?

- While some basic troubleshooting like checking connections and wiring can be done, replacing the throttle position sensor may require professional assistance.

8. Is it safe to reset the OBDII code P0222 in a 2012 Nissan Rogue using a diagnostic tool?

- Resetting the code may temporarily clear the error, but it is crucial to address the underlying issue causing the code to prevent future problems.

9. How much does it cost to fix the Throttle Position Sensor 1 Circuit Low Input error in a 2012 Nissan Rogue?

- The cost can vary depending on the exact cause of the issue, but it typically ranges from $100 to $300 for parts and labor.

10. Can a faulty throttle position sensor cause other issues in a 2012 Nissan Rogue besides the P0222 code?

- Yes, a faulty throttle position sensor can lead to poor fuel efficiency, rough idling, and other performance-related problems in addition to triggering the P0222 error code.