AutoCodes – Ford – P0222 2006 Ford Fusion

P0222 2006 Ford Fusion Code - Throttle Pedal Position Sensor Switch B Circuit Low

Quick Answer

The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating a low voltage, or open circuit. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0222 2006 Ford Fusion indicates Throttle Pedal Position Sensor Switch B Circuit Low.
Common causes: Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,885

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0222 2006 Ford Fusion Description

The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating a low voltage, or open circuit.

OBDII Code P0222 2006 Ford Fusion - Throttle Pedal Position Sensor Switch B Circuit Low - AutoCodes.com — P0222 2006 Ford Fusion Code - Throttle Pedal Position Sensor Switch B Circuit Low

What does this mean?

What are the Possible Causes of the DTC P0222 2006 Ford Fusion?

Faulty Throttle position sensor
Throttle position sensor harness is open or shorted
Throttle position sensor poor electrical connection

How to Fix the DTC P0222 2006 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0222 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0222 2006 Ford Fusion code?

Need more information on how to fix the P0222 2006 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0222 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0222 2006 Ford Fusion Code

1. What are common symptoms of OBDII code P0222 on a 2006 Ford Fusion?

- Common symptoms include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into a limp mode.

2. What does the OBDII code P0222 for a 2006 Ford Fusion indicate?

- The code P0222 indicates an issue with the Throttle Pedal Position Sensor Switch B Circuit Low.

3. What are possible causes of OBDII code P0222 on a 2006 Ford Fusion?

- Possible causes include a faulty throttle pedal position sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module.

4. How can I diagnose the Throttle Pedal Position Sensor Switch B Circuit Low issue on my 2006 Ford Fusion?

- You can use a diagnostic scanner to read the OBDII code and investigate the throttle pedal position sensor, wiring, and connectors for any visible damage or issues.

5. Can I still drive my 2006 Ford Fusion with OBDII code P0222?

- It is not recommended to drive the vehicle with code P0222 as it can lead to unsafe driving conditions and potential damage to the engine.

6. What are some repair tips for fixing OBDII code P0222 on a 2006 Ford Fusion?

- Repair tips may include checking and replacing the throttle pedal position sensor, repairing any damaged wiring or connectors, and resetting the fault code with a diagnostic scanner.

7. How much does it typically cost to repair OBDII code P0222 on a 2006 Ford Fusion?

- The cost of repair can vary depending on the exact cause of the issue, but it may range from $150 to $400 for parts and labor.

8. Is it possible to reset the OBDII code P0222 on a 2006 Ford Fusion without repairing the issue?

- While you can clear the fault code temporarily, it is important to address the underlying problem to prevent the code from reoccurring.

9. Can a DIY enthusiast repair OBDII code P0222 on a 2006 Ford Fusion?

- Depending on your skill level and access to tools, you may be able to repair the issue yourself by following a detailed repair guide specific to your vehicle.

10. How can I prevent OBDII code P0222 from appearing on my 2006 Ford Fusion in the future?

- Regularly inspecting and maintaining the throttle pedal position sensor, wiring, and connectors can help prevent the recurrence of code P0222 on your Ford Fusion.