P0221 2010 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'B' Circuit
Quick Answer
The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating an out of range in either the closed or wide open throttle (WOT) modes. Common causes include Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection, Faulty Throttle Position Sensor (TPS). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0221 2010 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'B' Circuit .
- Common causes
- Common causes include Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection, Faulty Throttle Position Sensor (TPS).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0221 2010 Ford Fusion Description
What are the Possible Causes of the DTC P0221 2010 Ford Fusion?
- Throttle Position Sensor (TPS) harness is open or shorted
- Throttle Position Sensor (TPS) circuit poor electrical connection
- Faulty Throttle Position Sensor (TPS)
- Fault Electric Throttle Control Actuator (or Throttle Body Motor)
- Accelerator Pedal Position Sensor (APP)
How to Fix the DTC P0221 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0221 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0221 2010 Ford Fusion code?
Need more information on how to fix the P0221 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0221 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0221 2010 Ford Fusion Code
1. What are the common symptoms of OBDII code P0221 in a 2010 Ford Fusion?
The common symptoms of P0221 include issues with the throttle response, reduced engine power, and the vehicle going into "limp mode."
2. What does the Throttle/Pedal Position Sensor/Switch 'B' Circuit refer to in the context of a 2010 Ford Fusion?
The Throttle/Pedal Position Sensor/Switch 'B' Circuit refers to a fault detected in the sensor or switch responsible for monitoring the position of the throttle pedal in the vehicle.
3. What are the possible causes of OBDII code P0221 in a 2010 Ford Fusion?
The possible causes of P0221 can include a faulty throttle position sensor, issues with the wiring or connectors related to the sensor, or a problem with the engine control module (ECM).
4. How can I diagnose the Throttle/Pedal Position Sensor/Switch 'B' Circuit issue in my 2010 Ford Fusion?
Diagnosing P0221 typically involves using a diagnostic scanner to read the code, checking the wiring and connectors for any visible damage, and testing the sensor's functionality using a multimeter.
5. Can I continue driving my 2010 Ford Fusion with OBDII code P0221?
It is not recommended to continue driving your vehicle with P0221 as it can lead to performance issues, reduced fuel efficiency, and potential safety hazards. It's best to address the problem promptly.
6. How can I repair OBDII code P0221 in a 2010 Ford Fusion?
Repairing P0221 may involve replacing the throttle position sensor, repairing or replacing damaged wiring or connectors, or resetting the ECM after fixing any underlying issues.
7. Is it possible to reset the OBDII code P0221 in a 2010 Ford Fusion without fixing the underlying problem?
While you can clear the code using a diagnostic scanner, it will likely return if the underlying issue is not addressed. It's crucial to fix the root cause of the problem to prevent further issues.
8. How much does it typically cost to repair OBDII code P0221 in a 2010 Ford Fusion?
The cost of repairing P0221 can vary depending on the exact cause of the issue, labor rates in your area, and whether you choose to do the repairs yourself or take your car to a mechanic.
9. Can a DIY enthusiast with basic automotive knowledge fix OBDII code P0221 in a 2010 Ford Fusion?
Depending on the exact cause of P0221, a DIY enthusiast with basic automotive knowledge may be able to replace the throttle position sensor or address wiring issues. However, more complex problems may require professional assistance.
10. How long does it take to repair OBDII code P0221 in a 2010 Ford Fusion?
The repair time for P0221 can vary based on the specific issue and the expertise of the person performing the repairs. It can take anywhere from a few hours to a full day to diagnose and fix the problem.
Discuss the causes and fixes for P0221 2010 Ford Fusion OBDII Code
Code P0221 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
