P0220 2007 Toyota Highlander Code - Throttle/Pedal Position Sensor/Switch 'B' Circuit
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection, Faulty Throttle Position Sensor (TPS). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0220 2007 Toyota Highlander indicates Throttle/Pedal Position Sensor/Switch 'B' Circuit.
- Common causes
- Common causes include Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection, Faulty Throttle Position Sensor (TPS).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0220 2007 Toyota Highlander Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P0220 2007 Toyota Highlander?
- Throttle Position Sensor (TPS) harness is open or shorted
- Throttle Position Sensor (TPS) circuit poor electrical connection
- Faulty Throttle Position Sensor (TPS)
- Fault Electric Throttle Control Actuator (or Throttle Body Motor)
- Accelerator Pedal Position Sensor (APP)
How to Fix the DTC P0220 2007 Toyota Highlander?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0220 2007 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0220 2007 Toyota Highlander code?
Need more information on how to fix the P0220 2007 Toyota Highlander code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0220 2007 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0220 2007 Toyota Highlander Code
1. What does OBDII code P0220 mean for a 2007 Toyota Highlander?
The code P0220 indicates an issue with the Throttle/Pedal Position Sensor/Switch 'B' Circuit in the vehicle.
2. What are the common symptoms of a Throttle/Pedal Position Sensor/Switch 'B' Circuit problem?
Common symptoms include issues with acceleration, throttle response, and potential stalling or hesitation while driving.
3. What are the possible causes of OBDII code P0220 in a 2007 Toyota Highlander?
Potential causes of code P0220 can include a faulty throttle position sensor, wiring issues, or problems with the throttle pedal position sensor or switch.
4. How can I diagnose the Throttle/Pedal Position Sensor/Switch 'B' Circuit issue in my Toyota Highlander?
Diagnosing the problem may involve using a scan tool to read the error code, checking the sensor's wiring for damage, and testing the sensor's resistance and voltage values.
5. Can I continue driving my Toyota Highlander with OBDII code P0220 present?
It is not recommended to continue driving with this code present, as it can lead to reduced performance and potential safety hazards on the road.
6. How can I repair OBDII code P0220 in my 2007 Toyota Highlander?
Repairing this code may involve replacing the faulty throttle position sensor, fixing any damaged wiring, or addressing issues with the throttle pedal position sensor or switch.
7. Are there any DIY tips for fixing a Throttle/Pedal Position Sensor/Switch 'B' Circuit problem?
While some basic troubleshooting steps can be done at home, it is recommended to have a qualified mechanic diagnose and repair the issue to ensure proper functioning of the sensor.
8. How much does it typically cost to repair OBDII code P0220 in a Toyota Highlander?
The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred to a few thousand dollars, including parts and labor.
9. Will resetting the OBDII code P0220 on my Toyota Highlander make the problem go away?
Resetting the code may temporarily clear the error, but if the underlying issue is not fixed, the code is likely to reappear once the problem is detected again.
10. Can a Throttle/Pedal Position Sensor/Switch 'B' Circuit problem impact the fuel efficiency of my Toyota Highlander?
Yes, a faulty sensor or switch can affect the vehicle's fuel efficiency by causing incorrect throttle control, leading to inefficient engine performance and increased fuel consumption.
Discuss the causes and fixes for P0220 2007 Toyota Highlander OBDII Code
Code P0220 2007 Toyota Highlander comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
