P0220 2006 Toyota Highlander Code - Throttle/Pedal Position Sensor/Switch 'B' Circuit
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection, Faulty Throttle Position Sensor (TPS). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0220 2006 Toyota Highlander indicates Throttle/Pedal Position Sensor/Switch 'B' Circuit.
- Common causes
- Common causes include Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection, Faulty Throttle Position Sensor (TPS).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0220 2006 Toyota Highlander Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P0220 2006 Toyota Highlander?
- Throttle Position Sensor (TPS) harness is open or shorted
- Throttle Position Sensor (TPS) circuit poor electrical connection
- Faulty Throttle Position Sensor (TPS)
- Fault Electric Throttle Control Actuator (or Throttle Body Motor)
- Accelerator Pedal Position Sensor (APP)
How to Fix the DTC P0220 2006 Toyota Highlander?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0220 2006 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0220 2006 Toyota Highlander code?
Need more information on how to fix the P0220 2006 Toyota Highlander code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0220 2006 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0220 2006 Toyota Highlander Code
1. What does OBDII code P0220 on a 2006 Toyota Highlander indicate?
The code P0220 indicates a problem with the Throttle/Pedal Position Sensor/Switch 'B' Circuit in the vehicle.
2. What are the common symptoms of a Throttle/Pedal Position Sensor/Switch 'B' Circuit issue in a 2006 Toyota Highlander?
Common symptoms include poor acceleration, reduced engine power, engine stalling, and the vehicle going into limp mode.
3. What are possible causes of OBDII code P0220 in a 2006 Toyota Highlander?
Possible causes include a faulty throttle position sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module (ECM).
4. How can I diagnose the Throttle/Pedal Position Sensor/Switch 'B' Circuit issue in my 2006 Toyota Highlander?
Diagnosis involves using a scan tool to check for the specific trouble code, testing the throttle position sensor with a multimeter, and inspecting the sensor's wiring and connectors for damage.
5. Can I still drive my 2006 Toyota Highlander with OBDII code P0220?
It is not recommended to drive the vehicle with this code present, as it can lead to unsafe driving conditions and potential further damage to the engine.
6. How can I repair OBDII code P0220 on my 2006 Toyota Highlander?
Repair options include replacing the throttle position sensor, repairing any damaged wiring or connectors, and resetting the ECM to clear the trouble code.
7. Are there any DIY tips for fixing a Throttle/Pedal Position Sensor/Switch 'B' Circuit issue in a 2006 Toyota Highlander?
While some basic troubleshooting and sensor replacement can be done by DIY enthusiasts, it is recommended to consult a professional mechanic for accurate diagnosis and repair.
8. How much does it typically cost to fix OBDII code P0220 on a 2006 Toyota Highlander?
The cost of repairing this issue can vary depending on the exact cause of the problem, but it may range from $100 to $300 for parts and labor.
9. Will resetting the ECM clear OBDII code P0220 on a 2006 Toyota Highlander?
Resetting the ECM may temporarily clear the trouble code, but if the underlying issue with the Throttle/Pedal Position Sensor/Switch 'B' Circuit is not resolved, the code is likely to reappear.
10. How important is it to address OBDII code P0220 in a 2006 Toyota Highlander promptly?
It is crucial to address this code promptly to ensure the safe operation of the vehicle, prevent further damage to the engine, and maintain optimal performance and fuel efficiency.
Discuss the causes and fixes for P0220 2006 Toyota Highlander OBDII Code
Code P0220 2006 Toyota Highlander comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
